Bedienungsanleitung Constructa CD689652 (Seite 18 von 52) (Deutsch, Englisch, Holländisch, Französisch)

596526

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Cleaning the metal mesh grease filters

: Risk of fire!

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least every 2 months.

Never operate the appliance without the grease filter.

Notes

■ Do not use any aggressive, acidic or alkaline cleaning

agents.

■ When cleaning the metal mesh grease filters, also clean the

holder for the metal mesh grease filters in the appliance

using a damp cloth.

■ The metal mesh grease filters can be cleaned in the

dishwasher or by hand.

In the dishwasher:

Note: If the metal mesh grease filters are cleaned in the

dishwasher, slight discolouration may occur. This has no effect

on the function of the metal mesh grease filters.

■ Do not clean heavily soiled metal mesh grease filters together

with utensils.

■ Place the metal mesh grease filters loosely in the dishwasher.

The metal mesh grease filters must not be wedged in.

By hand:

Note: You can use a special grease solvent for stubborn dirt. It

can be ordered via the Online Shop.

■ Soak the metal mesh grease filters in a hot soapy solution.

■ Clean the filters with a brush and then rinse them thoroughly.

■ Leave the metal mesh grease filters to drain.

Removing metal mesh grease filter

1. Open the lock and fold down the metal grease filter. While

doing this, place the other hand under the metal grease filter.

2. Take the metal grease filter out of the holder.

For edge extraction filters, pull the metal grease filter

downwards. While doing this, place the other hand under the

metal grease filter.

For additional filters, open the lock and fold down the metal

grease filter. While doing this, place the other hand under the

metal grease filter.

Notes

■ Grease can accumulate in the bottom of the metal grease

filter.

■ Hold the metal grease filter level, otherwise grease will drip

out.

3. Clean the metal grease filter.

Installing the metal mesh grease filter

1. Insert the metal mesh grease filter.

While doing this, place the other hand under the metal mesh

grease filter.

2. Fold the metal mesh grease filter upwards, locking it in place.

Area Cleaning agents

Stainless steel Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth.

Clean stainless steel surfaces in the

direction of the grain only.

Special stainless steel cleaning prod-

ucts are available from our after-sales

service or from specialist retailers.

Apply a very thin layer of the cleaning

product with a soft cloth.

Painted surfaces Hot soapy water:

Clean using a damp dish cloth and

dry with a soft cloth/towel.

Do not use any stainless steel clean-

ers.

Aluminium and

plastic

Glass cleaner:

Clean with a soft cloth.

Glass Glass cleaner:

Clean with a soft cloth. Do not use a

glass scraper.

Operating controls Hot soapy water:

Clean using a damp dish cloth and

dry with a soft cloth.

Risk of damage to the electronics

from penetrating moisture. Never

clean operator controls with a wet

cloth.

Do not use any stainless steel clean-

ers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Constructa CD689652 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info