Bedienungsanleitung Constructa CF232253 (Seite 58 von 72) (Deutsch, Englisch, Holländisch, Französisch)

542390

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Changing the clock

To subsequently change the time, press the KJclock function

button repeatedly until the KJ and 3 symbols light up again.

Change the time with the rotary selector.

Cleaning the appliance

Clean your appliance before using it for the first time.

1. Remove accessories and any remaining packaging from the

cooking compartment.

2. Clean the accessories and cooking compartment with hot

soapy water (see section: Cleaning and care).

3. Heat with % Top/bottom heat at 240°C for 60 minutes.

4. Afterwards, wipe the cooled cooking compartment with hot,

soapy water.

5. Clean the outside of the appliance with a soft, damp cloth

and soapy water.

Operating the appliance

In this section, you will find out how to switch your appliance on

and off, and how to select an operating mode and temperature.

Switching on the appliance

1. Turn the operating mode selector until the desired operating

mode is selected.

2. Turn the temperature selector until the desired temperature is

selected.

The r indicator lamp lights up while the appliance is heating

up and during any subsequent heating.

Switching off the appliance

1. Turn the operating mode selector back to the Û position.

2. Turn the temperature selector back to the Ú position.

After the appliance is switched off, the cooling fan may

continue to run.

Electronic clock

In this section, you can read about

■ how to set the timer

■ how to switch your appliance off automatically (cooking time

and end of operation)

■ how to switch your appliance on and off automatically (preset

operation)

■ how to set the time

Clock display

Notes

■ Between the times ƒƒ:‹‹ and †:†Š the clock display is

dimmed if you do not make any settings in that period or no

clock function is activated.

■ When you set a clock function, the time interval increases

when you set higher values (e.g. cooking time up to‚:‹‹œ to

the minute, using ‚:‹‹œ

to the nearest 5 minutes).

■ For the Q minute minder, x cooking time, y end of

operation and preselection mode clock functions, a signal

sounds when the settings have elapsed and the Q or y

symbol flashes. To cancel the audible signal before it ends,

press the KJ clock function button.

■ Briefly press the KJ clock function button to select a clock

function. You then have 3 seconds to set the selected clock

function. After this time, the setting mode is exited

automatically.

&ORFNIXQFWLRQEXWWRQ 5RWDU\VHOHFWRU

Clock function Use

Q Minute minder You can use the minute minder as an egg timer or a kitchen timer. The appliance does

not switch on or off automatically

x Cooking time The appliances switches off automatically after a cooking time setting has elapsed

(e.g. ‚:„‹ hours)

y End of operation The appliance switches off automatically at a set time (e.g. ‚ƒ:„‹ o'clock)

Preset operation The appliance switches on and off automatically. Cooking time and end of operation

have been combined.

3 Clock Setting the clock

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Constructa CF232253 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Constructa CF232253

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info