Bedienungsanleitung Constructa CN261152 (Seite 22 von 56) (Deutsch, Englisch, Holländisch, Französisch)

596517

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

After-sales service

Our after-sales service is there for you if your appliance needs

to be repaired. We will always find the right solution in order to

avoid unnecessary visits from a service technician.

E number and FD number

When calling us, please give the product number (E no.) and

the production number (FD no.) so that we can provide you with

the correct advice. The rating plate bearing these numbers can

be found in the oven. You can make a note of the number of

your appliance and the telephone number of the after-sales

service in the space below to save time should it be required.

Please note that there will be a fee for a visit by a service

technician in the event of a malfunction, even during the

warranty period.

Please find the contact data of all countries in the enclosed

customer service list.

Rely on the professionalism of the manufacturer. You can

therefore be sure that the repair is carried out by trained service

technicians who carry original spare parts for your appliances.

This appliance corresponds to the standards EN 55011 and

CISPR 11. It is a Group 2, Class B product.

Group 2 means that microwaves are produced for the purpose

of heating food. Class B states that the appliance is suitable for

private households.

Technical data

Automatic programmes

You can use the automatic programmes to defrost food with

the greatest of ease and prepare dishes quickly and easily. You

select the programme and enter the weight of your food. The

automatic programme makes the optimum setting. You can

select from 7 programmes.

Setting a programme

Once you have selected a programme, make settings as

follows:

1. Press the X button repeatedly until the required programme

number appears.

The indicator light above the button lights up.

2. Press the ¼ button.

The indicator light above the button lights up and a

suggested weight appears.

3. Turn the rotary selector to specify the weight of the dish.

It takes longer than before for the

food to heat up

The microwave power level setting was too low. Select a higher microwave power setting.

A larger amount of food than usual has been

placed in the appliance.

Double the amount – double the time.

The food was colder than usual. Stir or turn the food during cooking.

The turntable makes a scratching or

grinding noise.

Dirt or debris in the area around the turntable

drive.

Clean the roller ring and the recess in the

cooking compartment.

Microwave operation has been can-

celled for no apparent reason.

The microwave has a fault. If this fault occurs repeatedly, please call

the after-sales service.

"M" appears in the display. The appliance is in demo mode. Press and hold the ƒ button and the „

button for approx. 7 seconds.

Demo mode is deactivated.

Error message Possible cause Remedy/note

E no.

FD no.

After-sales service O

Input voltage AC 220-230 V ,50 Hz

Power consumption 1450 W

Maximum output power 900 W

Microwave frequency 2450 MHz

Fuse 10 A

Dimensions (HxWxD)

 appliance 382 mm x 594 mm x 388 mm

 cooking compartment 208 mm x 328 mm x 369 mm

VDE approved yes

CE mark yes

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Constructa CN261152 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info