609490
38
Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
38
Brakes
5.4.3.1 Replacing the brake pads
WARNING
Incorrect or improperly installed brake pads can lead to
malfunctions, e.g. brake failure.
Risk of accident and injury!
Only use original brake pads for hydraulic disc brakes.
Seek professional advice when purchasing brake pads.
If you are unable to replace the brake pads correctly,
you can ask your specialist dealer to replace the brake
pads.
Make sure that you follow the brake pad
manufacturer’s operating instructions when replacing
the brake pads.
1. Use a flat tool to push the brake pistons back into the starting
position in the brake calliper.Take care not to damage the
brake pistons or the brake discs when doing so.
2. Use a pair of pointed pliers to bend the inner end of the safety
splint until straight and pull the safety splint out of the brake
calliper.
3. Pull the old brake pads backwards out of the brake calliper.
4. To ensure optimum
functioning, clean the
brake pistons of any dirt or
wear debris from the brake
pads using a mild soapy
solution and a clean cloth.
5. Assemble the new, original
brake pads and the brake
pad springs. Make sure
to use the correct sides:
All parts are labelled with
“Right” or “Left”.
6. Squeeze the two brake
pads together with your
thumb and forefinger and
insert them the right way
around into the brake
calliper from behind.
7. Push the safety splint back
into the brake calliper.
Make sure that you bend
that safety splint back into
shape from the inside.
8. Check the brake action by
pulling on the brake lever.
9. Adjust the brake system if braking action is insufficient.
Fig.: Brake calliper
1 Brake calliper
2 Safety splint
3 Brake pad
4 Safety spring
1 3 42
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

conway-mountainbike

Suche zurücksetzen

  • Hallo,ich benötige ein Handbuch für mein Conway !ccc Serie high end Bikes Marathon fully plus Eingereicht am 30-5-2017 13:26

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Conway MOUNTAINBIKE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Conway MOUNTAINBIKE

Conway MOUNTAINBIKE Bedienungsanleitung - Deutsch - 47 seiten

Conway MOUNTAINBIKE Bedienungsanleitung - Holländisch - 100 seiten

Conway MOUNTAINBIKE Bedienungsanleitung - Französisch - 100 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info