Bedienungsanleitung Corbero CLVG4508W (Seite 37 von 42) (Englisch, Spanisch)

743174

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

NOTE: A click could be heard when the door is closed perfectly.

When the washing is over, you can shut off the switch by pressing"Power" button.

6. Starting a Washing Programme

Wash cycle table

Starting a wash cycle...

Draw out the lower and upper basket, load the dishes and

1. push them back. It is recommended to load the lower basket first, then the upper one (see the

section entitled "Loading the Dishwasher"). Pour in the detergent (see the section entitled "Salt,

Detergent and Rinse Aid").

Turning on the Appliance

NOTE: If all the lights begin to glimmer, that indicates the machine is out of order, please turn off the

main power and water supply before calling a service.

Forget to Add Dish

A forgotten dish can be added any time before the detergent cup opens.

1 Open the door a little to stop the washing.

2 After the spray arms stop working, you can open the door completely.

3 Add forgotten dishes.

4 Close the door, the dishwasher will work after ten seconds.

WARNING!

It is dangerous to open the door when washing, because the hot water may scald you.

Switch Off the Dishwasher

The digital display appears "---" and the buzzer rings 6 times, only in this case the programme

has ended.

1.Switch off the dishwasher by pressing the"Power" button.

2.Turn off the water tap!

Open the door carefully. Hot steam may escape when the door is opened!

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around

15 minutes before removing from the appliance.

Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In

this way they will be cooler and the drying will be improved.

Unloading the dishwasher

It is normal that the dishwasher is wet inside.

Empty the lower basket first and then the upper one. This will avoid water dripping from the upper

basket onto the dishes in the lower one.

Change the Programme.

Premise: A cycle that is underway can only be modified if it has only been running for a short time.

Otherwise, the detergent may have already been released, and the appliance may have already

drained the wash water. If this is the case, the detergent dispenser must be refilled (see the section

entitled " Fill in the Detergent " ).

Press”Power” button to cancel the programme, and turn on it again ,then you can change the

programme to the desired cycle setting (see the section entitled "Starting a wash cycle. . . " ).

NOTE: If you open the door when washing, the machine pauses and warning alarm rings, the display

appears E1. When you close the door, the machine will keep on working after 10 seconds.

The 6 programme lights show the state of the dishwasher:

a) One of the programme lights on--> cycle running

b) One of the programme lights blinking -->pause

2. Insert the plug into the socket. The power supply is 220-240V AC 50 Hz, the specification of the

socket is 12 A 250 VAC.50 Hz.

Make sure that the water supply is turned on to full pressure. Close the door, press the" Power"

button, Press the " Program” button to select a desired "Wash cycle". (See the section entitled "Wash

Cycle Table") . With a little force to ensure the door is properly closed.

EN 50242: this program is the test cycle

Program

Cycle Selection

Information

Description

of Cycle

Detergent

Pre/main

Running

Time

(min)

Energy

(kWh)

Water

(L)

Intensive

Eco

Light

Rapid

Pre-Rinse

For the heaviest soiled loads,

such as pots, pans, casserole

dishes and dishes that have

been sitting with dried food

on them for a while.

For normally soiled loads,

such as pots, plates, glasses

and lightly soiled pans.

standard daily cycle.

Light wash cycle to be used

for more delicate items which

are sensitive to high

temperatures.(Run cycle

immediately after use)

A shorter wash for lightly soiled

loads that do not need drying.

To rinse dishes that you

plan to wash later that day

Pre-wash

Main wash(60 )

Rinse 1

Rinse 2

Hot rinse

Drying

Pre-wash

Main wash(46 )

Rinse

Hot rinse

Drying

Pre-wash

Main wash(45 )

Rinse

Hot rinse

Drying

Main wash(45 )

Hot rinse

Pre-wash

5/22

5/20

186

216

144

13.0

8.5

10.5

5.5

3.3

1.30

0.70

0.68

0.53

0.01

The information for comparability test in accordance with EN50242,as follows:

--Capacity: 9 settings

--Position of upper basket: Lower position

--Rinse aid setting: 6 ( or 4 for four setting dispenser)

(*E 50242)

Programme)

(Standard

60 min

For lightly and normally soiled

plates and pans for every day.

Pre-wash

Main wash(60 )

Hot rinse

Drying

5/20

60 0.80 8.5

(or 3 in 1)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Corbero CLVG4508W Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info