Bedienungsanleitung Corbero CLVG91520I (Seite 35 von 46) (Englisch, Spanisch)

751448

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

4．Prior Using for the First Time

Dishwasher Features

Before using your dishwasher for the first time:

A. Set the water softener

B. Pour 500ml of water inside the salt container and then fill with dishwasher salt

C. Fill the rinse aid dispenser

D. Function of detergent

B. Loading the Salt into the Softener

Always use salt intended for use with dishwasher.

NOTE: If your model has no water softener, you may skip this section

WATER SOFTENER

The hardness of the water varies from place to place. If hard water is used in the

dishwasher, deposits will form on the dishes and utensils.

The appliance is equipped with a special softener that uses salts specifically

designed to eliminate lime and minerals from the water.

The salt container is located beneath the lower basket and should be filled as follows:

Attention!

Only use salt specifically designed for use in dishwashers! All other types of salt not specifically

designed for use in a dishwasher, especially table salt, will damage the water softener. In case of

damages caused by the use of unsuitable salt the manufacturer does not give any warranty nor is

liable for any caused damages.

Only fill with salt just before starting one of the complete washing programmes.

This will prevent any grains of salt or salty water, which may have been split, remaining on the

bottom of the machine for any period of time, which may cause corrosion.

After the first wash cycle the control panel light expires.

A. Remove the lower basket and then unscrew and remove the cap from the salt container.

B. If you are filling the container for the first time, fill 2/3 of its volume with water (around 500ml).

A. Set the Water Softener

The water softener is designed to remove minerals and salts from the water, which would have a

detrimental or adverse effect on the operation of the appliance. The higher the content of these

minerals and salts, the harder the water is. The softener should be adjusted according to the

hardness of the water in your area. Your local Water Authority can advise you on the hardness of

the water in your area.

Setting

The amount of salt dispensed can be set from H0 to H7.

Salt is not required at the set value H0.

1. Find out about the hardness value of your tap water. Your water utility company will help you

with this.

2. Set value can be found in the water hardness table.

3. Close the door.

4. Switch on "Power" switch.

5. Hold down " Delay" button and then press "Program" button for 5 seconds.The buzzer rings

one time and H..

flashes on the digital display.(factory setting is H4)

Clark

For optional

2. Set value can be found in the water hardness table.

3. Close the door.

4. Switch on on/off switch.

5. Hold down " Delay " button and press " Program "

button for 5 seconds.The buzzer rings one

time and H..

flashes on the digital dis play.(factory setting is H4)

To change the setting:

1. Press " Delay " button.

Each time the button is pressed, the set value

increasesby one level;when the value of H7 has

been reached, the display jumps back to H0(off).

2. Press " Program " button. The chosen setting

has now been stored.

Water hardness

Range

Mmol/l Set value on

the machine

0-8

9-10

11-12

13-15

16-20

21-26

27-38

39-62

soft

medium

hard

0-1.1

1.2-1.4

1.5-1.8

1.9-2.1

2.2-2.9

3.0-3.7

3.8-5.4

5.5-8.9

Water hardness table

Front View

1 Upper Basket

2 Spray Arms

3 Lower Basket

4 Water Softener

5 Detergent Dispenser

6 Rinse Aid Dispenser

7 Cutlery Tray

8 Cup Holder

Dishwasher Features

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Corbero CLVG91520I Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info