ENGLISH
39
Drying only
Warning! Do not exceed the maximum laundry
loads:
- 2.25 kg for linen and cottons
- 1.5 kg for synthetics.
The water tap must be open and the drain hose must
be positioned in the sink or connected to the drain
pipe.
1. Select the drying programme “G” for cotton or “K”
for synthetics.
2. Select the drying time in the appropriate sector.
3. Press the ON/OFF button to start the programme.
4. At the end of the cycle, press the ON/OFF button
again to switch the appliance off.
5. Remove the laundry.
Automatic washing and drying
(NON-STOP programme)
Warning! For NON-STOP programmes, it is also
essential not to exceed the maximum load sizes of
2.25 kg for cotton and 1.5 kg for synthetics.
If you use a dosing device in a washer-dryer,
please ensure the dosing device/ball is removed
before carrying out a drying programme.
1. Load the laundry.
2. Add detergent and additives.
3. Select the wash programme and the temperature.
4. Select eventually the required options by means
of the relevant buttons. If possible, do not reduce
the spin speed to avoid a too long drying time so
saving energy.
5. Select the drying time.
6. Start the programme by depressing the ON/OFF
button.
7. At the end of the programme, press the ON/OFF
button again to switch the machine off.
8. Remove the laundry.
7. At the end of the programme
The machine stops automatically.
If you have selected a programme which ends with
the water of the last rinse left in the tub, drain the
water before opening the door. Select programme
“Q” (drain) or “P” (short spin).
Wait one or two minutes before opening the door to
give the electric locking mechanism time to release
it.
Depress the On/Off button again to switch the
machine off. The operating pilot light goes out.
Remove the laundry.
Turn the drum by hand to make sure it is completely
empty, so as to avoid any forgotten items being
damaged in a subsequent wash (e.g. shrinking) or
their colour running into a load of whites.
Release any buttons which have been pressed.
Turn the water tap off and unplug the machine.
Leave the door ajar to air the machine.
