Bedienungsanleitung Cramer 82B1000 (Seite 2 von 135) (Alle Sprachen)

819005

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

English (original instructions)

DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET

SPECIFICATIONS

Type 82B1000

Voltage 82V DC

AIR volume 16.9 m³/min

Air speed 240 KM/H

Weight (Without

Battery) 2.1 kg

Battery Pack 82VH1000/9+

Charger &*&&

Sound pressure

level 88 dB(A), k:3.0 dB(A)

Sound power level 102 dB(A)

Vibration level <2,5m/s2, k=1.5m/s2

Double-insulated

construction

DESCRIPTION

See Figure 1.

1. Cruise control lever

2. Trigger

3. Cord retainer

4. Socket

5. Front tube

6. Rear tube

7. Power cord

8. Backpack battery charger

9. Charger connector

10. Backpack battery

ASSEMBLY

UNPACKING

Carefully remove the product and any accessories

from the box.

Inspect the product carefully to make sure no

breakage or damage occurred during shipping.

Do not discard the packing material until you have

carefully inspected and satisfactorily operated the

product.

If any parts are damaged or missing, please call your

Cramer service centre for assistance.

PACKING LIST

See Figure 1.

BLOWER ASSEMBLY

FRONT BLOWER TUBE (2)

REAR BLOWER TUBE

OPERATOR’S MANUAL

WARNING

Do not use this product if any parts on the Packing

List are already assembled to your product when you

unpack it. Parts on this list are not assembled to the

product by the manufacturer and require customer

installation. Use of a product that may have been

improperly assembled could result in serious personal

injury.

ASSEMBLING THE BLOWER TUBE

See Figure 2.

WARNING

Do not connect to power supply until assembly is

complete. Failure to comply could result in

accidental starting and possible serious personal injury.

Connect the rear tube (5) to the front tube (6). Twist

clockwise until the tubes lock into position.

Align either of the grooves (11) in the tube with the

tabs (12) on the blower housing. Push the tube into

the blower housing until the tab engages the grooves.

Turn the tube in the direction of the arrow until both of

the tabs slide into the lock positions.

CONNECTING THE POWER CORD TO THE BLOWER

See Figure 3.

Secure the power cord to the motor housing using the

cord retainer. This prevents accidental removal of the

electrical cord.

Insert the power cord plug (A) in the socket (4) on the

back of the blower.

Push the plug into the socket and turn

counterclockwise until the plug’s latch is engaged and

secure.

CONNECTING THE POWER CORD TO THE BACK-

PACK BATTERY. See Figure 4-5.

Insert the plug (B) in the socket (C) – line up the lugs

on the plug with the slots in the socket.

Once the end of the plug is inserted in to the socket,

turn the plug clockwise until the latch is engaged and

secure.

Fit cable in the cable (D) duct and wind through the

(E) housing – see also "Positioning the Cable".

POSITIONING THE CABLE See Figure 6.



power tool is being used with the battery, follow the

instructions below:

If using next to or behind your body, fit the cable (F)

in the lateral cable ducts (G) or (H) depending on the

tool that you are using and secure into place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cramer 82B1000 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info