Bedienungsanleitung Cramer 82CS25 (Seite 3 von 309) (Alle Sprachen)

818995

Zoom out

Zoom in

Vorherige Seite

1/309

Nächste Seite

cramer.eu

General power tool safety warnings

Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, ﬁre and/or

serious injury.

Save all warnings and instructions for future reference. The term “power

tool” in the warnings refers to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

Work area safety

•Keep work area clean and well lit. Cluttered or dark areas invite

accidents.

•Do not operate power tools in explosive atmospheres, such as in the

presence of ammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

•Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

Electrical safety

•Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

•Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock. Please note that rain, fog

and other humidity can vary in intensity and the equipment can not be used

in extreme conditions. Keep batteries away from saline environment and

contaminated liquids. After use, the battery and the device are to be dried.

Personal safety

•Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or medication. A lapse of attention

while operating power tools may result in serious personal injury.

•Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat

or hearing protection used appropriately will reduce personal injuries.

•Prevent unintentional starting. Ensure the switch is in the off position

before connecting to power source and/or battery pack and when

picking up or carrying the tool. Carrying power tools with your ﬁnger

on the switch or energizing power tools that have the switch on invites

accidents.

•Remove any adjusting key or wrench before turning the power tool

on. A wrench or a key left attached to a rotating part of the power tool may

result in personal injury.

•Do not over-reach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

•Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

•If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly used. Use

of dust collection can reduce dust-related hazards.

Power tool use and care

•Do not force the power tool. Use the power tool for the application.

The correct power tool will do the job better and safer at the rate for which

it was designed.

•Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous and

must be repaired.

•Disconnect the plug from the power source and/or the battery pack

from the power tool before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

•Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to

operate the power tool. Power tools are dangerous in the hands of

untrained users.

•Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly maintained power tools.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cramer 82CS25 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info