Bedienungsanleitung Cramer 82ZT107 (Seite 11 von 422) (Alle Sprachen)

818973

Zoom out

Zoom in

Vorherige Seite

1/422

Nächste Seite

4.2.5 OPERATION SUGGESTIONS

DANGER

Prior to operation, the operator should be thoroughly familiar with the proper use and operation of the equipment,

should read the manual completely and thoroughly, and should have attempted slow moving maneuvers to become

familiar with the operation of the equipment before attempting normalspeed operation. An inexperienced operator

should not mow on slopes or on uneven terrain.

WARNING

If you lose steering control while operating the machine, place the steering control levers in the park brake position

immediately and turn key to the OFF position. Inspect the machine and consult your Cramer dealer to resolve the

problem before continuing to operate.

WARNING

The unit’s steering control levers are very responsive. For smooth operation, move levers slowly, avoiding sudden

movements. Skill and ease of operation come with practice and experience. The machine can spin very rapidly.

Use caution when making turns and slow down before making sharp turns.

Inexperienced operators may have a tendency to oversteer and lose control. Slow-moving practice maneuvers are

recommended to become familiar with these characteristics before attempting normal-speed operation.

WARNING

Sharp depressions or raised obstacles (such as gutters or curbs) should not be directly approached at high speed

in an attempt to “jump” them as the operator could be thrown from the equipment. Approach at a slow speed and

angle one drive wheel at the obstruction. Continue at an angle until the wheel clears and then pivot the opposite

wheel around.

When turning on soft or wet turf, keep both wheels rolling either forward or backward. Pivoting on one stopped wheel

can damage turf. Keep blades sharp. Many problems with incorrect cutting patterns are due to dull blades or blades

which have been sharpened incorrectly. Blade sharpness should be checked daily.

DANGER

Never work with blades while key is in the ignition switch. Always place deck blades ON/OFF switch (PTO) in the

disengaged position, place steering control levers in the park brake position and turn key to the OFF position and

remove key from switch. Block up mower when you must work under it. Wear gloves when handling blades. Always

check for blade damage if mower strikes a rock, branch, or another foreign object during mowing.

•Direct grass discharge to right, away from unmowed area. Select a mowing pattern that directs grass

discharge towards the outside the mowing area. Generally, this means using a pattern utilizing left turns because

side discharge is to the right. In any case, avoid throwing grass discharge onto unmowed area because grass is

then mowed “twice.” Mowing twice puts an unnecessary load on the unit and reduces mowing efficiency.

•When mowing a lawn for the first time, cut grass slightly longer than normal to avoid scalping uneven terrain.

When possible, it is best to use the cutting height that was used in the past. When cutting grass taller than

152mm (6"), you may want to mow the lawn twice to achieve a better quality of cut.

•During normal mowing, cut only about 38mm (1.5") of the grass blade. Cutting more than that is not

recommended unless grass is sparse or it is the end of the mowing season.

•Alternate mowing pattern between cuts to keep the grass growing straight and better dispersion of the

clippings.

•Remember, grass grows at different rates at different time of the year. Mow more often in the early spring to

maintain the same cutting height. As the growth rate slows in mid summer, mow less frequently. If you cannot

mow at a regular interval, mow at a high cutting height at first, then mow again two days later at a lower cutting

height.

•Raise the cutting height of the mower if the cutting width of the mower is wider than the previous mower. This

ensures that uneven turf is not cut too short.

•Raise the cutting height of the mower if the grass if slightly taller than normal or if it contains a high degree of

moisture. Then mow it again with the cutting height set lower.

English EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cramer 82ZT107 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info