LIGHT / FUNCTION button to set the minutes.
6. Press the FLOW / SET button until the set time appears.
Activating and Deactivating the Alarm
1. To activate the alarm, press and hold the POWER / CANCEL and LIGHT /
FUNCTION buttons until the clock icon appears in the display.
2. To deactivate the alarm, press and hold the POWER / CANCEL and LIGHT /
FUNCTION buttons until the clock icon disappears from the display.
At the set time, the alarm will sound for 2 minutes, pause for 30 seconds, and then
sound for an additional 2 minutes. The alarm will automatically stop after the second
alarm sounds.
Press any button to manually stop alarm while it is sounding.
LCD DISPLAY SUPPORT BATTERIES
The LCD support batteries will save the clock time. Once the unit is disconnected from
the main power source, the LCD display will go off but the batteries will allow the clock
to keep operating.
Please Note:
The humidifier can be operated without support batteries.
The humidifier cannot be operated only with the support batteries.
The humidifier comes with support batteries in the humidifier battery
compartment. The support batteries are protected by a plastic strip. The plastic
strip must be removed to activate the batteries.
The battery compartment for the support batteries is located on the bottom of
the humidifier.
Replacing the LCD Support Batteries
Please Note: Replacement LR1130/1.5V batteries can be purchased at any local
drugstore.
1. Press the battery compartment tab and lift the compartment lid. Remove the
three LR1130/1.5V batteries
2. Insert three LR1130/1.5V batteries into the battery compartment. Please
observe the correct +/- battery polarity. The + polarity must point upwards.
3. Properly replace the battery compartment lid.
