Bedienungsanleitung Create Speaker Table (Seite 9 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

789750

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

ENGLISH

VOLUME CONTROL

USB CHARGING

WIRELESS CHARGING

LOW BATTERY AND CHARGING

MAKING PHONE CALLS VIA BLUETOOTH

• Press + button to increase the volume.

• Press - button to decrease the volume.

• When the speaker is powered on, or connected with the AC adapter, the USB ports can

charge an iPhone and an Android mobile phone at the same time (for example). When the

speaker is turned off, the USB port cannot charge any external devices.

• The charging coil of the wireless charging devices (The mobile phone which can support

Qi standard of wireless charging) needs to aim at the wireless charging mark which is in

the middle of the table speaker, when the speaker is powered on or connected with the

AC adapter. You will see the charging mark on the screen of your mobile phone or you will

hear a sound after connecting with the device for wireless charging.

• When the battery capacity is low, you will hear “Low Battery” to remind the user that the

speaker needs to be charged. lf the user does not connect the speaker to charge it, the

speaker will be automatically powered off.

• After connecting the AC adapter to the port on the back of the speaker, the red LED

light will be on while charging. The red LED light will turn off when the speaker is fully

charged.

• Caution: The LED light turns red for one second after connecting the AC adapter. Then,

the LED light will turn off. It means the built-in battery is fully charged.

• When a call comes in, the speaker will broadcast the incoming call’s phone number and

the dial tone. Shortly press the Play/Pause/phone button to answer the phone (try to

speak to the MIC so it will be a clear call). Short press again to hang up, and long press

to decline.

• Double press the Play/Pause/phone button for dialing the phone number of the last call

in record.

TWS FUNCTION

TWS feature allows you to link two speakers together. The rst table will be the master

connected to the Bluetooth device and operate all controls. The second table is a linked

speaker giving True Wireless Sound.

1. Turn on both table speakers, double click the POWER/TWS button on one of the two

table speakers, both speakers will enter team paring mode, you will hear an acoustic

signal, both blue LED indicators of both table speakers will ash rapidly at the same

time. After the team paring, the LED indicator of the rst speaker (Master) will remain

ashing slowly. The LED light of the second speaker (Sub-speaker and linked TWS) will

be green. After connecting with a phone or other Bluetooth device, the Master speaker

LED will be xed blue, the LED light of the sub-speaker will be xed green.

2. When speakers are team paired successfully, short press POWER/TWS button of the

Master speaker or the sub-speaker to switch off the team pairing TWS mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Create Speaker Table Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info