Bedienungsanleitung Create Thera Retro (Seite 9 von 68) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

789562

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH

PREHEATING

To make a good cup of hot espresso, we recommend preheating the appliance before brewing

coffee; this includes the lter holder, lter and your coffee mug. This will ensure you obtain the

best coffee drinking experience.

• Remove the detachable water tank from the appliance. Remove the lid from the tank and ll

it with water, the water level should never exceed the “MAX” line marked on the tank. Then

correctly attach the water tank back to the appliance.

• Place the lter into the lter holder (without any coffee), then insert the lter holder into the

appliance and turn it anticlockwise until it is at the “lock” position.

• Place your cup on the drip tray.

• Then connect the appliance to a power supply source. Make sure the steam control knob is

set to the “0” position.

• Press the ON/OFF button “ ” to turn on the unit, the power indicator (red) will light up. Make

sure that neither the coffee button “ ” nor the steam button “ ” are pressed down.

• Press down the coffee button “ ”. As soon as water starts coming out press the coffee but-

ton “ ” again. The purpose of this step is to pump the water from the tank into the housing.

• When the coffee indicator turns on (green), press the coffee button “ ” down again and hot

water will start owing out.

• After water has own for 20 seconds, press the coffee button “ ”. Now the preheating

process is nished.

MAKING ESPRESSO COFFEE

• Remove the lter holder by turning it clockwise. Place the lter in the lter holder, ll it with

ground coffee using the measuring spoon and compress the ground coffee tightly with the

tamper. A scoop of ground coffee is enough to make a cup of high-quality coffee.

• Place the lter holder in the machine and lock it by turning it in an anticlockwise direction.

• Make sure that the steam knob is at the “0” position and that neither the coffee button “ ”

nor the steam button “ ” are pressed down.

• Press the coffee button “ ” manually when you have brewed the desired amount of coffee

or if it’s coming out too diluted.

• Once you have nished brewing your coffee, press the ON/OFF button “ ” and the power

indicator light will turn off.

WARNING: Do not leave the coffee maker unattended while mak-

ing coffee, as it requires manual operation!

Note: During the brewing or steaming process, it is normal that the temperature light turns

off. This means the machine is heating up to keep the temperature at the standard range.

• Once the coffee making process is complete, you can remove the lter holder by turning it

clockwise from its “Lock” position and discard the coffee residue from the steel lter.

• Allow the appliance to cool down completely before rinsing it under running water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Create Thera Retro Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info