Bedienungsanleitung Create Wind Calm Line - Horizontal (Seite 6 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

820791

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISH

Thank you for choosing our ceiling fan. Before using this appliance and to ensure its best

use, please read the instructions carefully.

The safety measures listed here reduce the risk of re, electric shock, and injury when

followed correctly. Please keep the manual in a safe place for future reference, as well as

the sales receipt and box. If applicable, give these instructions to the future owner of the

appliance.

Always follow basic safety instructions and hazard prevention measures when using an

electrical appliance. The manufacturer will not be responsible for any damage resulting

from the user's failure to follow these instructions.

• According to safety regulations, the lowest point of the fan blade must be at least 2.3m (7

feet) from the oor.

• Please make sure the chosen location will not allow the rotating fan blades to come into

contact with any objects.

• Ensure ceiling joists are sound and are large and strong enough to support the weight of

the fan.

• To reduce the risk of re, electric shock or personal injury, ensure that the fan mounting

bracket is attached directly to the building structure. Do not mount to an outlet box.

• The mounting bracket must be rmly screwed to a load bearing structure, e.g. a concrete

ceiling, steel structure or timber frame. If a timber frame is added, it must be securely

nailed or screwed between two beams.

• To reduce risk of personal injury and property damage, do not bend or damage the downrod

or the fan blades when handling or installing them. If you notice any product imperfections,

please contact our after-sales service before proceeding to install the fan.

• Make sure the ceiling fan is securely fastened to the ceiling. All set screws must be

checked and re-tightened where necessary before fan operation.

• Turn off the power before performing any work on the ceiling fan and turn off the power

breaker. To avoid possible electrical shock, check that the power is turned off at the fuse

box or circuit breaker panel before wiring.

• The fan, mounting bracket and lighting equipment must be connected to a ground. Check

that all splices are well insulated.

• Check and conrm that all connections are correct and secure. Once all electrical connec-

tions have been made, store all cables securely.

• Do not attempt to control this fan from a wall switch or remote control that is not approved

by the manufacturer for use with the fan. Do not use a solid state controller. Use of a

non-approved wall switch or remote control will void your warranty.

• Do not connect the ceiling fan to a dimmer switch.

LOCATION AND INSTALLATION REQUIREMENTS

MECHANIC TIPS

ELECTRICAL TIPS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Create Wind Calm Line - Horizontal Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Create Wind Calm Line - Horizontal

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info