Bedienungsanleitung Create Wind Round (Seite 7 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

789616

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

SAFETY INSTRUCTIONS

INSTALLATION INSTRUCTIONS

• When using any electrical appliance, basic safety precautions should always be observed.

• Read this entire manual carefully before beginning installation. Save these instructions.

• Use only original spare parts.

• To reduce the risk of personal injury, connect the fan directly to the building support struc-

ture in accordance with these instructions and use only the supplied hardware.

• To avoid possible electrical shock, before installing your fan, disconnect power by turning

off the circuit breakers in the outlet box and the associated wall switch location. If you

cannot lock the circuit breakers in the off position, securely attach a prominent warning

device, such as a tag, to the service panel.

• All wiring must be in accordance with national and local electrical codes and ANSI / NFPA

70. If you are unfamiliar with wiring, contact a qualied electrician.

• To reduce the risk of personal injury, do not bend the blade clamping system when install-

ing, balancing, or cleaning the fan.

• Never insert foreign objects between the rotating fan blades.

• To reduce the risk of re, electric shock, or motor damage, do not use a solid state speed

control with this fan. Use only original speed controls.

• This appliance can be used by children from 8 years of age and by people with reduced

physical, sensory or mental capacities or lack of experience and knowledge if they have

received supervision or instructions on how to use the appliance safely and understand the

dangers involved. Children must not play with the appliance. Children should not perform

cleaning or maintenance unless they are over 8 years old and supervised. Close supervision

is necessary when any appliance is used by or near children.

NOTE: The important safety precautions and instructions in the manual are not intended

to cover all possible conditions and situations that may occur. It should be understood that

common sense and caution are necessary factors in the installation and operation of this

fan.

Mark the correct position of the holes and x the ceiling bracket using the screws with metal

plugs or screws and washers suitable for the type of ceiling chosen.

Check the correct installation of the bracket before hanging the fan. This plate must support

the full weight of the fan.

• To avoid personal injury and damage,

make sure the place to hang the sheets

leaves a clearance of 2.3 m from the

ground and 76 cm from any walls or

obstructions.

• Make sure the mounting bracket is

securely attached to the building

structure and can support the full

weight of the fan.

INSTALLATION PREPARATION

76 cm

from wall

or nearest

obstruction. 2.3 m from

the blades

to the

ground.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Create Wind Round Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info