Bedienungsanleitung Creda X153E (Seite 34 von 40) (Englisch)

498229

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

1. Plastic or nylon pads / scourers, these may scratch the surface.

2. Household abrasive powders.

3. Oven chemical cleaners, aerosols and oven pads.

Caustic cleaners such as these will etch the surface and attack the

metal frame.

4. Bath and sink cleaners may mark the surface.

The cleaning of sealed hotplates should be done when they are cold,

using a soap filled Brillo pad, following the

grain of the hotplate. This will

ensure that any stubborn,

burnt on spillages are removed. Wipe over with

a damp clean cloth, making sure that all the cleaner has been removed.

Finally, turn on hotplate to warm for a few minutes, then smear with a

little cooking oil to provide a protective coating, or the restorative agent

Homecare Four Hob, available from Credacare Spares or leading

supermarkets. The bezels will mellow with use to a burnished gold colour,

a soap filled Brillo pad will help to keep them bright, care should be taken

not to damage the vitreous enamel hob surface.

Note: We do not recommend the use of decorative covers over the hot

hotplates as these can hold condensation and cause corrosion. Accidental

operation with a cover in place can cause intense heat. Never place

saucepan lids on the hotplates, as this may cause corrosion.

To reduce the amount of cleaning always ensure that the hob and

cooking utensils are clean and dry before use. Regular use of cleaner

conditioner is recommended for proper care and protection of the hob

surface. Apply conditioner before using the hob for the first time. It

contains a mild cleaning agent, so that subsequent applications may

clean off soil and apply a protective film at the same time. For stubborn

stains or heavy soiling use any of the following materials, and finish off

with conditioner.

1. Cif, non-scratch scouring cream.

2. Liquid Gumption Kitchen Cleanser.

3. Special Powder Cleanser.

Powder Cleanser – Mineral deposits that are present in hard water, and

some foods, may cause ‘discolourations’ that appear in the form of grey

or brown stains. The stains sometimes appear to be in or under the glass

surface. If there are some persistent stains after using any of the other

recommended cleaning materials, powder cleanser may be applied,

following the manufacturers instructions. Do not use abrasive cleaners

or the powder cleanser on the painted metal framework.

Cleaner Conditioner – Regular use of the conditioner will make the

surface easier to clean thus ensuring that years of heavy abrasive

cleaning do not progressively dull the surface.

Care and Cleaning

TURN OFF THE MAIN COOKER WALL SWITCH BEFORE CLEANING.

BEFORE SWITCHING ON AGAIN, ENSURE THAT ALL CONTROLS

ARE IN THE OFF POSITION.

NEVER USE BIOLOGICAL WASHING POWDER, HARSH

ABRASIVES, SCOURING PADS, AEROSOL CLEANERS OR OVEN

CHEMICAL CLEANERS OF ANY KIND UNLESS

SPECIFIED BELOW.

Cleaning materials

to avoid

Electric sealed

hotplates

(X153E and X253E)

Ceramic hob

(X156E)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Creda X153E Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info