Bedienungsanleitung Cressi Archimede II (Seite 13 von 42) (Englisch)

618062

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

170

WARNING: Archimedes II Cressi-sub computer has been

developed for sport diving use only. It is not intended for

commercial or professional use requiring longer dive times

and greater depths. Diving beyond the parameters of sport

diving dramatically increases the risk of decompression

sickness.



DANGER: Cressi-sub discourages diving with

gaseous mixtures other than air without proper training.

The use of “

technical

” multi-gas mixtures may expose the

diver to different risks than those of sport diving, including

serious physical damages and, in extreme cases, death.

WARNING: After a dive with Archimedes II set in

mod. (depth meter-timer). The instrument will

not make saturation and de-saturation computa-

tions during the following 48 hours.

 DANGER: Should you decide to reset the instrument

by depressing button RESET on the back of the computer,

the nitrogen memory will be cancelled; therefore; the

instrument will not be able to compute a following dive.

Never use this function for at least 48 hours after the last

diving activity.

To go to program depress button B until the menu

is shown, then depress button C, which you may choose

Archimedes II DIVE/GAGE programs (Picture 7).

NOTE: Archimedes II computer is set at the factory on

program.

program will remain set until the diver changes the pro-

gram to be used.

In program, the INFO, PLAN and SIMU functions are swit-

ched off, while it is possible to set only a maximum depth

alarm which may be switched on or off by the user by setting

the instrument, following the same procedures shown in

chapter 2.5.1.

NOTE: In function the depth indicator gives indica-

tions between 0 – 655.8 ft..

Related topics:

• 2.5.1. – Maximum depth alarm.

• 3.6. – program (depthometer/timer)

2.5. - Instrument general setting.

2.5.1. - Maximum depth alarm

Archimedes II computer is equipped with a maximum depth

alarm preset at the factory (picture 8 a) on a value of 132 ft.

This is the limit of sport dives. When the function is on (ON)

(picture 8b), upon reaching the set maximum depth a sound

alarm will start and the display will flash for three seconds.

It is possible to switch on the alarm, or modify the maximum

depth, by depressing button B, then button A ( ), selecting,

in the following order, the dive’s parameters relating to:

PO2 Mix 1 -> FO2 Mix 1 -> PO2 Mix 2 -> FO2 Mix 2

-> Safety Factor -> Max Depth -> OFF/ON

While in Max Depth menu (picture 8 a), you may modify the

value of maximum depth from 0 – 325 ft., by depressing but-

ton C ( ). When you have set the desired depth, depress but-

ton A ( ) in order to switch on or off the depth alarm by means

of button C ( ). The computer is set at the factory on the

values of 132 ft. and OFF. Depressing button B (Mode) for seve-

ral seconds will return back to the normal display (picture 1).

Manuale ARCHIMEDE II 2008:Manuale 6 26-06-2008 8:26 Pagina 170

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cressi Archimede II Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info