Bedienungsanleitung Cressi Archimede II (Seite 27 von 42) (Englisch)

618062

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

184

4.1. – Data processing.

This chapter deals with all the “on surface” functions, inclu-

ding data processing after a dive, both in and in

programs. By depressing button B (Mode), it is possible to

track the following functions: ( )- logbook (please see

chapter 4.1.2.). ( ) – dive history memory (please see

4.1.3.). ( ) - Dive profile (please see chapter 4.1.4.). Data

PC transfer by means of the interface (optional) (please see

chapter 4.1.5.).

4.1.1. – Surface interval.

After a dive in program (a depth greater than 5 ft.), the

UFDS display will offer the following information (picture 25):

1 De-saturation time, given in hours and minutes by the

( ) icon;

2 “Don’t Fly” ( ) icon.

If the “Don’t Fly” icon is displayed, flights or travel to higher alti-

tudes than the current altitude must be avoided, so long as it

is visible on the display.

WARNING: DAN (Divers Alert Network) and UHMS

(Undersea and Hyperbaric Medical Society) advise a surfa-

ce interval time of between 12 and 24 hours for no decom-

pression dives, and a surface interval of 48 hours after a

decompression dive or especially fatiguing dives.

3 Surface time ( ), displayed in hours and minutes,

means the current surface interval time.

4 graph showing the tissues residual nitrogen after the dive.

NOTE: Should a dive begin with less than 10 minutes of sur-

face interval time, Archimedes II will consider this a conti-

nuation of the previous dive; the dive’s count and dive time

computation will restart from where they had stopped.

NOTE: Dives carried out after at least 10 minutes of surfa-

ce are considered as a new dive.

Should the dive be carried out in or depth meter/timer

program, the computer will not supply any data relating to

de-saturation and will process any saturation and de-satura-

tion computations during the following 48 hours elapsing

from the program dive. They are given by the surface

time (SURF T) icon, in hours and minutes, which indicates the

current surface time (picture 26).

By depressing button B (Mode) twice, you view to the dive

planning program, represented on the UFDS display by

( ) icon (picture 5b), as seen in chapter 2.4. It will take

into account the residual tissues’ nitrogen, and will modify the

no decompression time, making them shorter than those

given for the first dive.

NOTE: PLAN function does not function in compu-

ting program (depth meter/ timer).

At the end of de-saturation, the lateral bar, representing the

residual nitrogen, will be empty, representing the full elimina-

tion of residual nitrogen that may affect following dives.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cressi Archimede II Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info