Bedienungsanleitung Cressi Edy (Seite 33 von 50) (Englisch)

618069

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

222

4.2. - Dive logbook (

LOG

4.2.1. -

DIVE

program logbook.

Cressi-sub computer stores data related to the last 30

hours’ dives (or to the last 60 dives) conducted in DIVE pro-

gram: the data are entered every 30 seconds in the logbook

(dive journal). To activate the logbook, depress button A

( ) repeatedly, until the (LOG) icon appears on the display

(picture 40)

NOTE: Any dive lasting less than 30 seconds (data ente-

ring frequency) will not be stored.

‘s logbook is a multifunction instrument that allows to

view, on three different display modes, a full series of data rela-

ted to dives, starting with the most recent one in chronologi-

cal order.

The main display mode (picture 40) shows on the bottom the

(LOG) function, which is soon replaced by the number of dive

and display mode (1/3 = first of the three available modes

related to that dive).

The display supplies the following information:

1 Dive’s year.

2 Dive’s date (month and day) – in brackets the dive’s num-

ber in the daily series

NOTE: the first dive of the daily series is noted in brackets

with 1 (meaning dive 1), the second with 2 (dive 2), and so on.

3 Maximum depth reached during the dive, given in m or ft.

4 Dive’s number: the most recent dive’s information is given

first. When more than 60 dives are conducted, the oldest

dives are cancelled out.

5 Graph of the residual nitrogen at the end of the dive: if it

remains in the "green" zone, the dive is classified a no

decompression dive; if it enters the "red" zone, the dive is

considered a decompression dive.

6 Indicator of altitude level at which the dive has been con-

ducted (see chapter 2.2.).

7 The ( ) icon appears when the dive has been conduc-

ted with EANx mixture (Nitrox).

8 Graph of CNS O2 toxicity (see chapter 3.3.3.).

All three display modes show as well all icons related to the

alarms which may have started during the dive, like:

(PO2) (PO2 alarm); (SLOW) (maximum ascent rate alarm), and so on

To view the second logbook display mode, just depress button

D ( ). The mode’s number 1/3 is replaced by 2/3, mea-

ning the second of the available logbook modes related to

the dive.

This second mode supplies the following data (picture 41):

1 Dive’s starting time (the time at which the computer has

gone below 4 ft., starting the dive time computation.

2 Dive’s end time (the time at which the computer has gone

above 4 ft.;

3 Dive’s average depth (AVE) in m or ft.

4 Dive’s total time, given in minutes, shown by the "DIVE T."

icon

To revert back to the first display mode, just depress button

C ( ), To view the third logbook display mode, just

depress button D ( ). The mode’s number 2/3 is repla-

ced by 3/3, meaning the third and last of the available log-

book modes related to the dive.

EDY.qxd:EDY Manuale2006-2.qxd 20-06-2008 11:52 Pagina 222

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cressi Edy Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info