12
TEMPERATURE/ HUMIDITY ALERT
Press “ALERT“ to turn alert on and off.
Hold “ALERT“ 3 seconds to enter the alert setting mode. The indoor channel and the Upper/ Lower limit icons
flash.
Press “ +, - “ to select indoor channel, Ch1, 2 or 3 and press “ALERT“ to confirm the channel. The Upper limit icon
and temperature value will flash, enter the desired upper limit with the “ +, - “ buttons, press “ALERT” to confirm
and go to the lower limit setting.
The Lower limit icon and temperature value will flash, enter the desired lower limit with “ +, -“ buttons, press
“ALERT” to confirm and go to set upper/ lower humidity limits.
Each setting cycle will allow setting one channel for the temperature/ humidity alert. The unit allows to enter
temperature & humidity alert for the indoor channel and all of the channel 1, 2, 3.
When temperature/ humidity hits the preset limits, the Upper & Lower limit icons and the temperature/ humidity
values of the respective channel will flash, press “ALERT” keys to stop the alarm.
LOW BATTERY INDICATION
Low battery indication is available for the home unit itself and all of the 3 remote channels. Replace the batteries
and follow the setup procedure as mentioned in this instruction manual.
BATTERY DISPOSAL
Replace only with the same or equivalent type recommended by the manufacturer.
Please disposal of old, defective batteries in an environmentally friendly manner in accordance with the relevant
legislation.
SPECIFICATIONS
Range of temperature measurement:
Indoor unit : 0 C to + 50 C (+32 F to +122 F)
Indoor Humidity : 20% - 99% RH
Remote sensor : -20 C to +60 C (-4 F to +140 F)
Barometer : 900 to 1050 mb/hPa
Altimeter : -100 to 2500 meter
Channel : max. 3 remote sensors
Transmission : up to 30M (100 ft.) open area, RF434 MHz
Resolution : 0.1 degree for temperature, 1% for humidity, 1 hPa mb for pressure
Clock : DCF77 Radio-Controlled, Quartz back-up
Batteries : AA x 2 pcs for main unit, AAA x 2 pcs for remote sensor
