Bedienungsanleitung Crivit 1LD3473 IAN 87794 (Seite 41 von 48) (Französisch, Italienisch)

736583

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite



Now the height display will appear

HEIGHT GROESSE TAILLE TAMANO

Set each digit of your height by pressing SEL and confirm each digit by pressing

SET.

Exit setting mode by pressing MODE.

Second time zone

Press and hold SEL for 3 seconds. The watch will switch to the second time zone

display and T2 will appear on the display. Setting the second time zone can be

accomplished in the same way as described in the previous paragraph.

Press and hold SEL for 3 seconds to return to normal time mode.

Alarm

ALARM ALARM ALARM ALARMA

Press and hold SET for 3 seconds to enter setting mode.

"AL" will appear on the display and the minutes of the alarm time will blink.

Press SEL to set the minutes and press SET to confirm your setting. Set the hours in

the same way.

You may optionally set the month and day as well.

If neither month nor day are set the alarm will sound daily. If the day is set, the

alarm will sound monthly. If both the month and the day are set the alarm will

sound only at the set date.

The hourly chime setting will now appear on the display

CHIME STDALARM SIGN HOR HORA AL

Press SEL to select a setting and confirm your setting by pressing SET

(ON/EIN/ACTIF/ENCENDID=on,

OFF/AUS/INACTIF/APAGADO=off).

If the chime is activated, the bell symbol will appear and the watch will chime at

the beginning of every hour.



Exit setting mode by pressing MODE.The alarm can be activated or deactivated

by pressing SET. If the alarm is activated the alarm symbol will appear.

When the alarm sounds, press SET, SEL or MODE to stop the alarm.

Snooze feature

If no button is pressed when the alarm sounds, the alarm will shut off after 30

seconds and the symbol will blink on the display. The alarm will stop and will

resume after sounding after 2 minutes. The process will repeat itself 5 times.

Timer (max. 23:59:00)

TIMER TIMER COMPTE TIMER

Press and hold SET for 3 seconds to enter setting mode.

The minutes of the timer time will blink on the display.

Press SEL to set minutes of the timer time and confirm your setting by pressing SET.

Set the hours in the same way.

Now the additional settings for the timer will follow. Press SEL to select the desired

mode:

Cd r After reaching 0:00 the timer will count the set time again.

Cd U After reaching 0:00 the timer will count forward

Cd S After reaching 0:00 the timer will stop

Exit setting mode by pressing MODE.

The timer can be started or stopped by pressing SET.

Press and hold SET to reset the timer.

After the timer time is up an alarm will sound.

Stop watch

CHRONO ST-UHR CHRONO CRONO

Press SET to start or stop the stop watch. Press SEL while the stop watch is running

to record a lap time. Up to 99 laps can be recorded.

Press and hold SET to reset the stop watch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit 1LD3473 IAN 87794 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Crivit 1LD3473 IAN 87794

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info