Bedienungsanleitung Crivit AS 4553 IAN292955 (Seite 10 von 32) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

736243

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

10 GB/IE

Storage, cleaning

It is recommended that the product be thorough-

ly cleaned and dried after being used.

Remove small stones or other objects that may

have remained on your wheels. Dry off wet or

damp ball bearings with a clean cloth.

Oil the bearings from the outside with a suitable

bearing oil to prevent rusting. Always store the

product in a dry place.

Disposal

Dispose of the article and the packaging materi-

als in accordance with current local regulations.

Packaging materials such as foil bags are not

suitable to be given to children. Keep the packa-

ging materials out of the reach of children.

Notes on the guarantee and

service handling

The product was produced with great care and

under constant supervision. You receive a three-

year warranty for this product from the date of

purchase. Please retain your receipt.

The warranty applies only to material and

workmanship and does not apply to misuse or

improper handling. Your statutory rights, espe-

cially the warranty rights, are not aﬀected by this

warranty. With regard to complaints, please con-

tact the following service hotline or contact us by

e-mail. Our service employees will advise as to

the subsequent procedure as quickly as possible.

We will be personally available to discuss the si-

tuation with you. Any repairs under the warranty,

statutory guarantees or through goodwill do not

extend the warranty period. This also applies to

replaced and repaired parts. Repairs after the

warranty are subject to a charge.

IAN: 292955

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: deltasport@lidl.co.uk

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: deltasport@lidl.ie

Maintenance

Replacing the wheels (Fig. I)

Important! Please observe the technical

data. Wheels that have a diﬀerent dia-

meter can change the riding properties

and, in some cases, possibly endanger

the user.

Do not use wheels that cannot be per-

fectly mounted.

Never mount wheels that are larger

than the product’s original wheels.

Wheels wear out. This wear and tear results from

many factors, for example the ground, the user’s

size and weight, the weather conditions, the ma-

terial of the wheels and their durability. It is thus

necessary to replace them from time to time.

• Loosen the axle bolts (19) with two size 5

Allen keys.

• Pull out the axle bolts and remove the wheel

(20).

• Install the new wheel and secure it with the

axle bolts.

After replacing:

Do not use if the wheel grinds on the

sides following replacement!

Make sure that all screws are still se-

cure and have not loosened after the

ﬁrst few minutes of riding.

Tighten the wheel again to make sure

that it runs smoothly and that no noises

are coming from the bearings.

Exchanging the ball bearings

(Fig. J)

• Remove the wheels (20) as described.

• Press out one of the bearings (22) on the

spacer (21) by pressing with an Allen key

and remove the spacer.

• Press out the other bearing (22) by pressing

with an Allen key.

• Push in a new bearing. Turn the wheel over,

insert the spacer and then push in a second

new bearing.

• Secure the wheels again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit AS 4553 IAN292955 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info