Bedienungsanleitung Crivit AS 5937 IAN 327440 1904 (Seite 12 von 32) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

735842

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

12 GB/IE

Dispose of the products and the packaging

in an environmentally friendly manner.

The recycling code is used to identify

various materials for recycling.

The code consists of the recycling symbol

– which is meant to reﬂect the recycling cycle –

and a number which identiﬁes the material.

Notes on the guarantee and

service handling

The product was produced with great care and

under constant supervision. You receive a three-

year warranty for this product from the date of

purchase. Please retain your receipt.

The warranty applies only to material and

workmanship and does not apply to misuse or

improper handling. Your statutory rights, espe-

cially the warranty rights, are not aﬀected by this

warranty.

With regard to complaints, please contact the

following service hotline or contact us by e-mail.

Our service employees will advise as to the

subsequent procedure as quickly as possible.

We will be personally available to discuss the

situation with you.

Any repairs under the warranty, statutory gua-

rantees or through goodwill do not extend the

warranty period. This also applies to replaced

and repaired parts. Repairs after the warranty

are subject to a charge.

IAN: 327440_1904

Service Great Britain

Tel.: 0800 404 7657

E-Mail: deltasport@lidl.co.uk

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: deltasport@lidl.ie

1. Loosen the axle bolts (17) with two size 5

Allen keys.

2. Pull out the axle bolts (17) and remove the

wheel (18).

3. Install the new wheel (18) and secure it with

the axle bolts (17).

After replacing the wheels:

Do not use the wheels if they pull side-

ways after replacing them! After the

ﬁrst few minutes of riding, make sure

that all screws are still tight and that

nothing has detached or become loose.

Tension the wheel once more to make

sure that it is running quietly and that

the bearing isn’t making any noise.

Replacing the ball bearings

(Fig. H)

1. Remove the wheels (18) as described in the

section “Replacing the wheels”.

2. Use an Allen key to lever out a bearing (19).

3. Remove the spacer (20) from the wheel (18)

and turn it over.

4. Lever out the other bearing (19) with an Allen

key.

5. Press in a new bearing (19). Turn the wheel

(18) over, insert the spacer (20) and then

press in a second new bearing (19).

6. Secure the wheel (18) again as described in

the section “Replacing the wheels”.

Storage, cleaning

We recommend that you clean and dry the item

thoroughly after use.

Remove small stones or other objects that may

have got caught on the rollers. Dry wet or damp

ball bearings with a clean cloth. Grease the

bearings with a suitable bearing lubricant from

the outside to prevent external rust. Always store

the item in a dry place.

Disposal

Dispose of the article and the packaging

materials in accordance with current local

regulations. Packaging materials such as foil

bags are not suitable to be given to children.

Keep the packaging materials out of the reach

of children.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit AS 5937 IAN 327440 1904 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info