Bedienungsanleitung Crivit B450 IAN 281564 (Seite 17 von 125) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

736875

Zoom out

Zoom in

Vorherige Seite

1/125

Nächste Seite

17 GB/IE/CY

… / Before use / Start-up / Replacing the 12 V fuse / Troubleshooting

Securing the cool box lid

with the handle

Fold the handle

forward (in the direction of

the “LOCK“ mark) to close the cool box lid

tightly (see Fig. C1).

Fold the carrying handle

up when transport-

ing the cool box. The cool box lid

is closed

tightly (see Fig. C2).

Fold the handle to the back (in the direction of

the “OPEN“ mark) to open the cool box lid

(see Fig. C3).

Tips for best cooling output

and energy savings

The cool box works in ambient temperatures between

-10 °C and 43 °C with a relative humidity of 90 %.

The minimum temperature may not be reached at an

external temperature of over 30 °C.

Select a well ventilated location protected from

the sun.

Only place pre-cooled items in the electric cool

box.

Do not open the electric cool box longer than

necessary.

Do not leave the lid

open longer than nec-

essary.

Be sure not to overﬁll the electric cool box and

air can circulate suﬃciently between the items

being cooled.

Before use

Place the electric cool box on a level surface.

Clean the electric cool box with a damp cloth.

Start-up

Note: When powered by car battery be sure

the car engine is running. Operating the electric

cool box with the engine oﬀ may drain your car

battery and you will be unable to start the engin

Plug the DC connecting cable on the electric

cool box into the cigarette lighter socket in your

car, boat or caravan.

Close the electric cool box tightly using the

electric lid

, the product will start cooling.

After a short while you will be verify the electric

cool box is operating correctly by placing your

hand up to the aluminium vent inside the lid.

Note: The plug does not have a status indicator.

Be sure not to accidentally leave the cool box

on as this will drain the car battery.

Remove the plug from the 12 V socket of your

car, boat or caravan to switch oﬀ the cool box.

Replacing the 12 V fuse

Also see Figure B.

To replace the fuse

remove the cap

loosen the screw

on the plug and disassem-

ble the plug.

Remove the fuse

Note: If the thin metal connection between the

two metal tips is broken, the fuse

is defective

and must be replaced.

Insert the new fuse

with care.

Reassemble the plug and screw in the screw

The plug is now ready for operation.

Troubleshooting

In the event the electric cool box malfunctions,

unplug and perform the following tests:

– Is the connection cable correctly connected

and does the cigarette lighter of your vehicle

function properly?

– Did you set up the electric cool box so air can

circulate freely to ensure the cooling unit is ven-

tilated?

– Is the fuse

inside the plug on the 12 V con-

necting cable defective?

– A fuse on the socket in your car, caravan or

boat may be defective. Most vehicles require

the ignition to be on to supply electricity.

– Is the electric cool box level?

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit B450 IAN 281564 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info