Bedienungsanleitung Crivit BW7170 IAN327353 1904 (Seite 12 von 32) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

735706

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

1. Loosen the axle bolts (21)(22) with two size 5

Allen keys.

2. Pull out the axle bolts and remove the roller.

3. Install the new roller (16) or (17) and secure it

with the axle bolts.

After replacing the wheels:

Do not use the rollers if they pull sideways after

replacing them!

After the first few minutes of skating, make sure

that all screws are still tight and that nothing has

detached or become loose.

Tension the roller once more to make sure that

it is running quietly and that the bearing isn’t

making any noise.

Replacing the ball bearings (Fig. G)

1. Remove the roller (16) or (17) as described in

the section “Replacing the rollers”.

2. Use an Allen key to lever out a bearing (19).

3. Remove the spacer (20) from the roller and

turn it over.

4. Lever out the other bearing with an Allen key.

5. Press in a new bearing. Turn the roller over,

insert the washer and the spacer and then

push in a second new bearing.

6. Secure the roller again as described in the

section “Replacing the rollers”.

Storage and cleaning

We recommend that you clean and dry the item

thoroughly after use.

Remove small stones or other objects that may

have got caught on the rollers. Dry wet or damp

ball bearings with a clean cloth. Grease the

bearings with a suitable bearing lubricant from

the outside to prevent external rust. Always store

the item in a dry place.

Disposal

Dispose of the article and the packaging materi-

als in accordance with current local regulations.

Packaging materials such as foil bags are not

suitable to be given to children. Keep the pack-

aging materials out of the reach of children.

Dispose of the products and the packag-

ing in an environmentally friendly manner.

The recycling code is used to identify

various materials for recycling. The code

consists of the recycling symbol – which is

meant to reflect the recycling cycle – and

a number which identifies the material.

Notes on the guarantee and

service handling

The product was produced with great care and

under constant supervision. You receive a three-

year warranty for this product from the date of

purchase. Please retain your receipt.

The warranty applies only to material and

workmanship and does not apply to misuse or

improper handling. Your statutory rights, espe-

cially the warranty rights, are not affected by this

warranty.

With regard to complaints, please contact the

following service hotline or contact us by e-mail.

Our service employees will advise as to the

subsequent procedure as quickly as possible.

We will be personally available to discuss the

situation with you.

Any repairs under the warranty, statutory guar-

antees or through goodwill do not extend the

warranty period. This also applies to replaced

and repaired parts. Repairs after the warranty

are subject to a charge.

IAN: 327353_1904

Service Great Britain

Tel.: 0800 404 7657

E-Mail: deltasport@lidl.co.uk

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: deltasport@lidl.ie

GB/IE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit BW7170 IAN327353 1904 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info