Bedienungsanleitung Crivit H14347 IAN 56018 (Seite 9 von 57) (Deutsch, Englisch, Dänisch)

736568

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

9 GB/IE

Getting started

function. Otherwise the functions of the

pedometer cannot be used properly.

Note: After you have set all the parameters

before using it for the ﬁrst time, you can

change the parameters at any time. The only

thing you cannot change at a later date is the

unit of measurement (metric or US system). If

you wish to change the unit of measurement,

you will have to remove all the batteries

from the battery compartment

or press the

RESET button

. This process resets the preset

values again.

Hold mode / Count mode

When you start the device, the pedometer is

automatically in count mode.

Note: In hold mode the measuring func-

tions of the pedometer are disabled.

j Press and hold the MODE button

for

about 3 seconds. An acoustic signal will

sound. The display

will ﬂash alter-

nately with the number of the steps.

j Press and hold the MODE button

for

approx. 3 seconds to enter count

mode. You will hear a signal.

dis-

appears.

Setting parameters

j When you start to operate the device for

the ﬁrst time or switch the device to hold

mode (see “Hold mode/counting mode”),

you can set or change various parameters.

j To do so, press the SET button

, to get

to set mode. The word “SET” will light

up in the LC display.

j The indicators kg, cm, km or lb, inch, mile

ﬂash. Press the buttons MODE

or CLEAR

to set the desired unit of

measurement (metric or US system).

j Conﬁrm your entry by pressing the SET

button

. The word STRIDE will appear

in the function bar

. The cm symbol

and the preset value 60 cm / 25 inch ﬂash

in the LC display. Press the buttons MODE

or CLEAR

in order to set the de-

sired length of your stride.

Note: You can specify a stride length of

between 30 to 200 cm / 10 to 80 inch.

Tip: Press the MODE

or CLEAR

button for about 3 seconds. This will speed

up the process of setting the values. You

can use this fast way of setting the param-

eters for the setting procedures that follow.

j Conﬁrm the entry by pressing the SET

button

. The word WEIGHT will appear

in the functionbar

. The kg symbol

and the preset value 60 kg / 120 lb ﬂash

in the LC display. Press the buttons MODE

or CLEAR

to set the desired weight.

Note: You can specify a weight of

between 30 to 200 kg / 60 to 400 lb.

j Conﬁrm the entry by pressing the SET

button

. The word HEIGHT will appear

in the function bar

. The preset value

ﬂashes in the LC Display. Press the MODE

or CLEAR

button to enter the desired

value.

Note: A value between 60 and 250 cm /

20 and 100 inch can be entered.

j Conﬁrm your settings by pressing the

SET button

. The LC display shows the

AGE

indicator and the number 18 as

the preset value. Press the MODE

CLEAR

button to enter the desired age.

Note: Any age between 5 and 99 years

can be entered.

j Conﬁrm the entry by pressing the SET

button

. The words MAN or WOMAN

will light up. Press the buttons MODE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit H14347 IAN 56018 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Crivit H14347 IAN 56018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info