736848
12
Zoom out
Zoom in
Vorherige Seite
1/27
Nächste Seite
10 GB/IE
Keep exits clear. Do not block the exit with
objects.
Make sure you know the fire precaution
arrangements on the site.
§Tent assembly
Inside the carrying bag there is a label with
a QR-code. If the QR code is scanned you
will receive details about how to pitch the
product.
Please ensure that the product is only
assembled by people with the appropriate
skills.
Note: The polyester material of the tent
consists of water-repellent material.
It is possible that during the first rainfall
the tent will not be completely watertight.
However, the threads of the tent will contract
when exposed to water so that after a short
time the tent will become watertight.
Erect the product in accordance with the
illustrations A to F.
Illustration A:
1. Place the outer tent 1 flat on the ground.
The holders for the poles 3 4 must be
facing upwards.
2. Push the poles marked in different colours
carefully through the holders marked with the
same colour.
Illustration B:
3. Set the tent 1 up and fix the poles to the
rings of the floor fastenings.
Illustration C:
4. Fix one side of the tent in the ground with
the tent pegs 7. Then take hold of the other
end of the tent and pull it apart in such a
way that the tent is taut.
5. Secure the outer tent 1 by tensioning the
floor fastenings with the tent pegs 7.
6. Now secure the outer tent 1 with the guy
rope (pre-assemble) 6 and the tent pegs
7.
Illustration D:
7. Open the sunroof (entrance), unroll it and
attach it with the two fasteners.
8. Hang the detachable pockets 12 in inner
tent.
Illustration E:
9. Hang the inner tent 2 and the floor
tarpaulin 9 into the toggle and click
closures of the outer tent 1 that are
designated for that purpose.
10. Use the hooks 8 at the corners of inner
tent 2 to connect with the outer tent 1.
Illustration F:
11. Stretch the tent until taut and pull all of the
corners and guy ropes 6 until they are
tight. Do not over-tighten the guy ropes
6. If the strength of the wind increases
the attachment point and seam of the tent
might tear. In order to use the entrance as
a sunroof, insert the main support poles 5
into one another and attach the pointed end
of the main support poles 5 into the holes
of the sunroof provided.
12. Secure the supporting poles 5 with the
supporting ropes 10 and the tent pegs 7.
13. Lay out the groundsheet 9 in the tent and
engage the hooks of the groundsheet 9 in
the rings of the tent attachments.
14. The door in the partition of the inner tent 2
can only be opened to one side.
§Taking down the tent
Clean the tent both inside and outside before
you take the tent down. The tent must be
dismantled in the reverse order to the manner
in which it has been erected.
§Packing the tent together
m CAUTION! Please ensure that the tent is
completely dry before you pack it together.
Otherwise this may result in stains and
damage to the fabric.
m CAUTION! The tent pegs 7 and other
individual parts must be packed separately in
the bags provided. Otherwise the tent pegs
7 might damage the tent.
Always fold the outer tent 1 together in
such a way that the floor of the tent is facing
outwards.
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Crivit HG00412 IAN 273647 IAN 273648 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info