Bedienungsanleitung Crivit HG02005C IAN 282737 (Seite 10 von 29) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

736872

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

10 GB/IE

Keep the exit free! Do not block the exit with

objects.

Danger of suffocation! If

the inside of the tent is not adequately ventilated,

there is a risk of suﬀocation.

Fire precautions

Camp safely. Follow these common

sense rules:

Do not place hot appliances near the walls, roof

or curtains.

Always observe the safety instructions for these

appliances.

Never allow children to play near hot appli-

ances.

Keep exits clear. Do not block the exit with

objects.

Make sure you know the ﬁre precaution arrange-

ments on the site.

Take note of the effects of the weather

and climate

When selecting the location to put up your tent,

you should always consider the local situation

and how this might change. Will the terrain

turn into a lake if it rains? Please take into ac-

count any rising rivers and incoming tides.

Protect the product against strong wind and

storms. Place the product in a location that is

protected from the wind if possible.

If a strong wind is forecast, replace the normal

tent pegs with special storm pegs. You can ﬁnd

information about meaningful supplementary

products at specialist shops.

The tent should be taken down before heavy

snowfall or stormy weather.

Remove any snow directly from the product.

Otherwise the product may collapse under the

weight.

Ensure that the tent is not too taut when it is

erected, otherwise it may not be able to adapt

to changing weather conditions and might be

damaged.

Zips are wearing parts and do not fall under

the guarantee conditions.

The polyester material of the tent consists of

water-repellent material.

It is possible that during the ﬁrst rainfall the tent

will not be completely watertight. However, the

threads of the tent will contract when exposed

to water so that after a short time the tent will

become watertight.

When exposed to moisture and rain, tent fab-

rics expand to varying degrees and make it

necessary to adapt the length of the guy lines.

If the material becomes taut again while dry-

ing, the guy lines have to be loosened again in

good time.

Do not use any insect spray in or on the tent.

Small leaks on the seams can be repaired with

a seam spray and impregnation spray can be

used for the tent skin.

Assembly

Please ensure that the product is only assembled/

disassembled by a competent person.

Erecting the tent

ATTENTION: Please note that the poles are under

tension and snap into the natural shape of the tent.

Taking care that the release of tension does not

cause any injury.

Remove the rubber band and throw the product

away from you into the air.

Folding the tent

Please see a video using our QR code that

demonstrates how to fold away and packing

the tent.

Grab all the loops together in one of your

hands. Start at the rear end in order to allow

the air escape completely through the front

entrance (see ﬁg. A–B).

Keep the four loops gathered in one hand and

put the tent into an upwards position (see ﬁg. C).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit HG02005C IAN 282737 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info