Bedienungsanleitung Crivit HG03468 IAN 292637 (Seite 10 von 28) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

736233

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

9 GB/IE

 You should also familiarize yourself with the

local ﬁre protection regulations (e.g. camping

site, tent pitch).

 Warning! Danger of suﬀocation!

If the inside of the tent is not adequately

ventilated, there is a risk of suﬀocation.

 Make sure that the vents on the side of the

inner tent are not covered at any time.

 Do not leave children unattended in the tent.

 The logo on the inner tent

indicates it

is an access slot for USB cables (for LED

lighting or phone charging).

WARNING! Do not use high voltage

appliances or hot appliances in the

tent, as this may cause ﬁre or electric

shock.

 Fire precautions

Camp safely. Follow these

commonsense rules:

 Do not place hot appliances near the walls,

roof or curtains.

 Always observe the safety instructions for

these appliances.

 Never allow children to play near hot

appliances.

 Keep exits clear. Do not block the exit with

objects.

 Make sure you know the ﬁre precaution

arrangements on the site.

 Tent assembly

 Inside the carrying bag there is a label with

a QR code. If the QR code is scanned you

will receive details about how to pitch the

product.

 Please ensure that the product is only

assembled by people with the appropriate

skills.

 Note: The polyester material of the tent

consists of water-repellent material.

 It is possible that during the ﬁrst rainfall

the tent will not be completely watertight.

However, the threads of the tent will contract

when exposed to water so that after a short

time the tent will become watertight.

 Erect the product in accordance with the

illustrations A to F.

Illustration A:

1. Place the outer tent

ﬂat on the ground.

The tunnels for the poles

must be

facing upwards.

2. Fix one side of outer tent

in the ground

with the tent pegs

, then take hold of the

other end of the tent and pull it apart in such

a way that the outer tent is ﬂat.

3. Push the ﬁberglass pole

through the

tunnel guide on the top of outer tent

that

it extends evenly on both sides of the tunnel

guide.

Illustration B:

4. Set the tent

up and ﬁx the poles to the

metal pins of the ﬂoor fastenings.

5. Attach the pole hook to the poles

and

Illustration C:

6. Fix the tent to the ground with the tent

pegs

. Secure the outer tent

tensioning the ﬂoor fastenings with the tent

pegs.

7. Now secure the outer tent with guy rope

(pre-assembled) and the tent pegs.

Illustration D:

8. Open the entrance, unroll it and attach it with

the two fasteners.

9. Hang the inner tent

into the toggles of

the outer tent

that are designated for that

purpose.

10. Use the hooks at the corners of inner tent

to connect with the outer tent

11. Repeat steps 9 and 10 to set another inner

tent

on the other side of outer tent

Illustration E:

12. Use the hooks at the corners of the ﬂoor

to connect with the outer tent

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit HG03468 IAN 292637 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info