Bedienungsanleitung Crivit HG03469B (IAN 330940 1907 (Seite 13 von 36) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

735693

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

GB/IE

Illustration F and G:

6. Place the inner tent

in the outer tent

Attach the fastening hooks of inner tent to

the metal loops on the front side and plastic

loops on the back of the outer tent.

Illustration G:

7. Attach the fastening hooks of outer ground

sheet

to the metal loops on the front side

and plastic loops on the door of the outer

tent

Illustration H:

8. Open the ventilating windows

and secure

them with the spacers

9. Secure the tent

until taut and pull all

of by tensioning guy ropes

and ﬂoor

fastenings with the tent pegs

10. Stretch the tent until taut and pull all of the

corners and guy ropes

until they are tight.

11. Do not over-tighten the guy ropes

, if the

strength of the wind increases the attachment

point and seam of the tent might tear.

Illustration I:

12. Open the entrance, unroll it and attach it

with the two fasteners.

 Taking down the tent

 Clean the tent both inside and outside before

you take the tent down. The tent must be

dismantled in the reverse order to the manner

in which it has been erected.

 Packing the tent together

CAUTION! Please ensure that the tent is

completely dry before you pack it together.

Otherwise this may result in stains and

damage to the fabric.

m CAUTION! The tent pegs

and other

individual parts must be packed separately

in the bags provided. Otherwise the tent

pegs might damage the tent.

 Always fold the tent together in such a way

that the ﬂoor of the tent is facing outwards.

 Collect all of the parts together carefully

before you pack the tent. You should count

the parts in order to ensure that none of them

have been mislaid or lost.

 After the tent has been rolled up, pack it

carefully into the carrying bag.

 Cleaning and care

CAUTION! Never wash the tent in a

washing machine. Otherwise the product

may lose some of its ability to keep out water.

m CAUTION! Never use petrol, solvent or

other cleaning agents. Otherwise there is a

risk of damage to the product.

Condensation can form in all synthetic tents;

you should therefore air the tent as frequently as

possible in order to counteract this.

 Remove any dirt from the tent with a soft

sponge and clean water.

 Please allow all parts to dry thoroughly

before you repack the tent. This will prevent

the formation of mould, bad odours and

discolouration.

 If the zipper sticks when being opened or

closed, spray it with silicone spray.

 The product may lose some of its ability to

keep out water with frequent use. Therefore

you should spray the tent regularly with a

waterprooﬁng agent (available in DIY shops,

camping shops etc.).

 Store the product in a cool dry area.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit HG03469B (IAN 330940 1907 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info