Bedienungsanleitung Crivit HG04765 IAN 313762 (Seite 11 von 35) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

735868

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

11 GB/IE

8. Open the ventilating windows

and secure them

with the spacers.

9. Secure the outer tent

by tensioning the ﬂoor

fastenings with the tent pegs

10. Now secure the outer tent

with the guy rope

(pre-assembled)

and the tent pegs

Illustration F:

11. Open the entrance, unroll it and attach it with

the one fasteners.

12. Stretch the tent until taut and pull all of the

corners and guy ropes

until they are tight.

Do not over-tighten the guy ropes

. If the

strength of the wind increases the attachment

point and seam of the tent might tear.

Inner tent (without using the outer tent):

Warning: The inner tent and the mesh do not show

a UV protection. Protect your skin. While using the

inner test alone without the outer tent, rains may get

in the inner tent through the mesh windows. Use the

inner tent only under by a shelter covered in warm,

dry conditions with fair weather.

Illustration G:

1. Place the inner tent

ﬂat on the ground. The

hooks for the poles

must be facing upwards.

2. Run the two poles

with the metal end forward

into the hole of the hook on the inner tent one

after another and slide them through to the end.

Illustration H:

Push the pole

of the awning through the hook

on the awning so that it extends evenly on both

sides of the hooks.

4. Set the tent

up and ﬁx the poles to the plastic

cup of the ﬂoor fastenings.

Illustration I:

5. Run the ﬁberglass poles

through the hooks

and ﬁx into the plastic cap on the both end of

the top of inner tent

6. And then tie up the poles

tightly with the

strings at the top of the inner tent

Illustration J:

7. Fix one side of the inner tent

in the ground

with the tent pegs

. Then take hold of the

other end of the inner tent

and pull it apart

in such a way that the tent is taut.

8. Secure the inner tent

by tensioning all the

ﬂoor fastenings with the tent pegs

Taking down the tent

Clean the tent both inside and outside before you

take the tent down. The tent must be dismantled

in the reverse order to the manner in which it has

been erected.

Packing the tent together

CAUTION! Please ensure that the tent is com-

pletely dry before you pack it together. Other-

wise this may result in stains and damage to the

fabric.

CAUTION! The tent pegs

and other indi-

vidual parts must be packed separately in the

bags provided. Otherwise the tent pegs

might damage the tent.

Always fold the tent together in such a way

that the ﬂoor of the tent is facing outwards.

Collect all of the parts together carefully before

you pack the tent. You should count the parts

in order to ensure that none of them have been

mislaid or lost.

After the tent has been rolled up, pack it care-

fully into the carrying bag.

Cleaning and care

CAUTION! Never wash the tent in a washing

machine. Otherwise the product may lose some

of its ability to keep out water.

CAUTION! Never use petrol, solvent or other

cleaning agents. Otherwise there is a danger

of damage to the product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit HG04765 IAN 313762 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info