Bedienungsanleitung Crivit IAN 78984 (Seite 17 von 20) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

736580

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

17GB

Assembly

(Images are examples for all

product variations)

The product is delivered folded up in its

transport condition. To make it ready to ride,

proceed as follows:

Unfold (Fig. A)

1. Loosen the lower quick-release fastener (1).

2. Pull the lever (2) upward and fold the stee-

ring post (3) forward until it locks in.

3. Secure the folding mechanism by fastening

the lower quick-release fastener.

Attach handlebars (Fig. B)

1. Release the handlebars (4) from the

holders (5).

2. Press down on the locking buttons (6) on the

handlebars and push the handlebars into the

T-pipe (7) on both sides of the steering

column. The locking buttons must audibly

click into the designated holes (8).

Adjusting the steering post

height (Fig. C)

The steering post can be adjusted to

four diﬀerent heights. Only use the pro-

duct after clicking the locking button

into one of the four holes and securing

the steering post with the quick-release

fastener!

1. Loosen the quick-release fastener (9) on the

steering post.

2. Pull the steering post (10) upward until the

locking button (11) locks into one of the four

holes (12).

3. Secure the steering post by tightening the

quick-release fastener.

Steering head bearing (Fig. D)

The steering head bearing is preset at the time

of delivery. In the event the handlebar has too

much play after some time or become too stiﬀ,

have the steering head bearing adjusted by a

speciality retailer or a bicycle shop.

To put the product back into

its transport condition

1. Loosen the quick-release fastener on the

steering post, press the locking button, push

the steering post all the way in, then tighten

the quick-release fastener.

2. Press the locking buttons on the handles, pull

the handles out of the T-bar and secure to the

holders.

3. Loosen the lower quick-release fastener

(Fig. E) and pull the lever (2) upward, push

the steering post toward the deck until it locks

in (Fig. F). Tighten the lower quick-release

fastener (Fig. G).

Use

Riding, braking, parking

(Fig. H)

• Place one leg on the deck (13) and regularly

push oﬀ with the other leg for momentum.

• Step on the brake plate to brake (14).

• Unfold the kickstand (15) to park.

The product may only be parked on a

smooth surface.

Maintenance

Replacing the wheels (Fig. I)

Important!

Please observe the technical data.

Wheels that have a diﬀerent diameter

can change the riding properties and, in

some cases, possibly endanger the user.

Do not use wheels that cannot be per-

fectly mounted. Never mount wheels

that are larger than the product’s origi-

nal wheels.

Wheels wear out. This wear and tear results from

many factors, for example the ground, the user’s

size and weight, the weather conditions, the ma-

terial of the wheels and their durability. It is thus

necessary to replace them from time to time.

• Remove the axle bolts (16) using two setscrew

wrenches size 5.

• Remove the axle bolts and remove the wheel.

• Attach the new wheel (17) and secure with

the axle bolts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit IAN 78984 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info