Bedienungsanleitung Crivit PZ-2116 IAN 104999 (Seite 6 von 24) (Französisch)

736634

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

8 GB/IE

Caution: The frame is under tension

when folded and will always return

to the tent form. Make sure that this

tensioning force does not cause you any

injuries.

1. Remove the article from the bag.

Caution: Hold the article tightly when

removing the rubber band.

2. Remove the rubber band and throw the

article into the air.

3. Fix the four guy-ropes and the four eyelets

below the article using the tent pegs and

close the hook-and-loop fasteners around the

crossing tent poles (ﬁgure B).

Disassembly

NOTE!

Disassemble the tent, if possible, when clean

and dry to prevent the formation of mould and

mildew. After disassembling in rain, immedia-

tely dry the tent. Clean all the parts thoroughly

before packing them away.

1. Remove the tent pegs and the guy-ropes.

2. Grip the back tent pole at the bottom

(ﬁgure C).

3. Now take the upper tent poles one at a time

and ﬁnally the bottom tent pole with the

opening (ﬁgure D).

4. Hold the middle of the tent poles tightly in

one hand.

Important: Hold the tent poles tightly

and do not let them go. The tent poles

are under tension and could injure you.

5. Stand the article upright in front of you and

keep holding the tent poles in the middle

(ﬁgure E).

6. Use your free hand to grip the upper tent

poles in the middle and press them from

above all the way down onto the tent poles

at the bottom (ﬁgure F).

7. Pull the tent poles inwards towards yourself

(ﬁgure G).

8. Put the tent poles that you are still holding

over one another. Make sure that the tent

poles with the rubber band are on top

(ﬁgure H).

9. Place them all tidily above one another and

pull the rubber band around the article.

Put the article, the tent peg sack with the tent

pegs, and the guy-ropes in the bag, and

close the bag (ﬁgure I).

Maintenance

In the case of small tears and holes, use a repair

kit from a specialist shop. Immediately replace

broken tent poles. Oil the zips a little if they

become stiﬀ.

Care

Brush dirt oﬀ the dry tent surface; if necessary

treat with clean water. Do not use a chemical

cleaning product. Seal the tent seams from time

to time. For this, use a commercial seam sealer.

Storage

Store the product in a dry place to prevent the

mould and weather marks. If it is not used for

a longer period, take the product out of the

packsack and store it in a dry place out from

direct sunlight.

Notes for disposal

Please dispose of the packaging and product

separated according to materials and in an

environmentally-friendly manner! Dispose of the

product through an approved waste disposal

ﬁrm or by using your local municipal administrati-

on. Observe the current applicable legislation.

3 years warranty

The product was produced with great care and

under constant supervision. You receive a three-

year warranty for this product from the date of

purchase. Please retain your receipt.

The warranty applies only to material and

workmanship and does not apply to misuse or

improper handling. Your statutory rights, espe-

cially the warranty rights, are not aﬀected by this

warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit PZ-2116 IAN 104999 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Crivit PZ-2116 IAN 104999

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info