Bedienungsanleitung Crivit QUADCOPTER - IAN 306200 (Seite 13 von 70) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

779281

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

15GB/IE/NI

Charging the battery

1. Remove the battery (9) from the battery com-

partment (1g) of the quadrocopter (1) (Fig.E).

WARNING:Never charge the battery

(9) while it is still mounted to the quadro-

copter (1). It could catch fire and destroy

the item.

Do not remove the outer case of the battery (9).

This protects the battery (9).

2. Connect the end of the cable (6a) of the USB

charging cable (6) to the battery connector (9a)

of the battery (9) (Fig.F).

3. The battery charge indicator of the USB charg-

ing cable (6) is automatically activated (Fig.F).

4. Plug the other end (6b) of the USB charging

cable (6) into a USB port on a powered-on

computer or charging station with a USB port

(Fig.F).

5. The charge indicator light on the cable end (6b)

turns itself off.

NOTE: Charging takes

about 110-120 minutes.

6. After charging, disconnect the battery connector

(9a) from the end (6a) of the USB charging

cable (6) and unplug the end (6b) of the USB

charging cable (6) from the USB port.

7. Insert the rechargeable battery (9) into the

battery slot (1g) correctly (see “Inserting the

rechargeable battery”).

Under-voltage warning

The lights (1h) start flashing when the rechargeable

battery (9) is almost empty. Land the quadrocop-

ter(1) as soon as you notice this.

Inserting the battery

1. Open the battery compartment lid (1i) of the

battery compartment (1g) and insert the bat-

tery(9).

2. Connect the battery connection (9a) (9b) with

the quadrocopter (1).

3. Close the battery compartment (1g) completely.

Removing the battery (Fig.F)

Open the lid (1i) of the battery compartment (1g)

and insert the battery (9).

NOTE: If the battery connector (9a) (9b)

is connected to the quadrocopter (1), you

must disconnect this before removing the

rechargeable battery (9) from the quadro-

copter (1).

Setting the camera (Fig.G)

The camera (1e) is firmly attached under the quad-

rocopter (1). Turn the camera wheel-buttons up or

down to set the camera lens position.

NOTE: The camera (1e) has a small LED

indicating status. For good visibility, the

camera functions are also shown via the

quadcopter (1) LEDs.

Transferring data (Fig.H)

Photographs and film are stored on the micro-SD

card (10). The data is transferred to a computer

or device with a USB port (such as a television) as

follows:

1. The Micro-SD card (10) is positioned inside

the camera (1e). Press down on the micro-SD

card(10) and remove it from the port (1e).

2. Slide the micro-SD card (10) fully into the mi-

cro-SD card USB stick (7), as shown in Figure H.

NOTE: Take care to insert the micro-SD

card (10) properly. It needs to be almost

completely inside the micro-SD card USB

stick (7).

3. Insert the micro-SD card USB stick (7) into the

USB port of a computer.

4. The computer will recognise the micro-SD card

USB stick (7) and you will then be able to copy

the data to the computer.

Suitable flight environment

For ideal flight conditions, the following criteria

should be met:

• Calm wind conditions, up to force 3 winds.

• Check local weather report for current weather

conditions and forecast changes.

• People must remain a safe distance (5m) from

the quadrocopter when it is taking off.

• Be aware of obstacles before flying, and move

them out of the way if possible, or maintain a

safe distance from them (> 5m).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit QUADCOPTER - IAN 306200 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info