Bedienungsanleitung Crivit SB6044 IAN 311060 (Seite 18 von 50) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

735869

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

20 GB/IE

Transport

1. Always have two people transport the dinghy;

use the cord on the stern and the carry handle

(1d) on the bow (ﬁg. H) for this purpose.

2. Attach the paddles to the respective paddle

retainers (1f) on the side of the dinghy (ﬁg. K).

Storage, cleaning

WARNING!

Use only care products containing no

acid or petroleum components and nev-

er use silicon-based products.

Always store the product deﬂated and clean and

dry at room temperature and out of the reach of

rodents.

The valves should always be closed during

storage. Make sure that the product is stored ﬂat,

not twisted.

1. Clean your dinghy thoroughly each time after

use by rinsing it with clean water and mild

soap to get rid of salt crystals, grains of sand,

and other tiny contaminants. Then allow it to

dry completely.

2. Let the air out of all air chambers completely.

3. Fold the dinghy up carefully.

Repairs

WARNING!

When there is more serious damage

you should not under any circumstance

perform repairs yourself.

You can repair minor damage with the repair set

(8) supplied.

1. Let the air out of the dinghy completely

and clean the location in question using an

alcohol-based solution. Use ﬁne sandpaper to

roughen the area around the tear or hole.

2. Trim a patch that covers the damaged area

and overlaps by 1.25cm on all sides.

3. Apply the adhesive to the location on the din-

ghy and also to the patch. Allow the adhesive

to air out a little.

4. Press the patch down ﬁrmly with something

soft.

Note: Be sure to work on an even surface

without wrinkles or folds. Gently remove any air

bubbles with a rounded object, working from the

inside towards the outside.

5. After repairs wait at least 12 hours before

inﬂating the dinghy again.

Information on disposal

Dispose of the item and its packaging materials

in accordance with current local regulations.

Packaging materials like e.g. foil bags must be

kept away from children. Keep the packaging

materials out of reach of children.

Dispose of the equipment and packag-

ing in an environmentally-friendly

manner.

The recycling code is used to identify

various materials for recycling.The code

consists of the recycling symbol – which

is meant to represent the recycling cycle – and a

number which identiﬁes the material.

Notes on the guarantee and

service handling

The product was produced with great care and

under constant supervision. You receive a three-

year warranty for this product from the date of

purchase. Please retain your receipt.

The warranty applies only to material and

workmanship and does not apply to misuse or

improper handling. Your statutory rights, espe-

cially the warranty rights, are not aﬀected by this

warranty.

With regard to complaints, please contact the

following service hotline or contact us by e-mail.

Our service employees will advise as to the

subsequent procedure as quickly as possible.

We will be personally available to discuss the

situation with you.

Any repairs under the warranty, statutory gua-

rantees or through goodwill do not extend the

warranty period. This also applies to replaced

and repaired parts. Repairs after the warranty

are subject to a charge.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit SB6044 IAN 311060 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info