Bedienungsanleitung Crivit Sports 1-LD4497 - IAN 285066 (Seite 6 von 58) (Englisch)

658119

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Second time zone

Press and hold SEL for 3 seconds. The watch will switch to the second time zone

display and T2 will appear on the display. Setting the second time

zone can be accomplished in the same way as described in the

chapter “Setup of the heart rate monitor”.

Press and hold SEL for 3 seconds to return to normal time mode T1.

Alarm (ALARM)

Press SEL to select the sub-features. Press and hold SET for 3

seconds to enter setting mode.

"AL" will appear on the display and the minutes of the alarm time

will blink.

Press SEL to set the minutes and press SET to confirm your setting. Set the hours in the

same way.

You may optionally set the month and day as well.

If neither month nor day are set the alarm will sound daily. If the day is set, the alarm

will sound monthly. If both the month and the day are set the alarm will sound only

at the set date.

The hourly chime setting will now appear on the display.

Press SEL to select a setting and confirm your setting by pressing SET (ON/EIN

=on, OFF/AUS =off). If the chime is activated, the bell symbol

will appear and the watch will chime at the beginning of every

hour.

Exit setting mode by pressing MODE.

The alarm can be activated or deactivated by pressing SET. If the alarm is activated

the alarm symbol will appear.

When the alarm sounds, press SET, SEL or MODE to stop the alarm.

Snooze feature

If no button is pressed when the alarm sounds, the alarm will shut off after about 30

seconds and the symbol will blink on the display. The alarm will

stop and will resume after sounding after about 90 seconds. The

process will repeat itself 4 times.

Timer (TIMER),(max. 23:59:00)

Press SEL to select the timer sub-feature. Press and hold SET for 3 seconds to set the

timer. The minutes of the timer time will blink on the display. Press SEL to set the time

and press SET to confirm your setting. Set the hours in the same way.

Now select the additional feature mode of the timer by pressing SEL:

Cd r After reaching 0:00 the timer will count the set time again

Cd U After reaching 0:00 the timer will count forward

Cd S After reaching 0:00 the timer will stop

Exit setting mode by pressing MODE. The timer can be started or stopped by

pressing SET. After the time has run out, an alarm will sound.

Press and hold SET to reset the timer.

Stop watch (ST-UHR/CHRONO)

Press MODE to select the feature before proceeding.

Press SET to start or stop the stop watch. Press SEL while the stop watch is running to

record a lap time. Up to 99 laps can be recorded.

Press and hold SET to reset the stop watch.

Memory feature

Press SEL while the stop watch is stopped to display the fastest lap on the display

(BEST RD/BEST LAP). Press SET to display the other lap times.

Please note: The memory feature can only be used if at least one lap time was

recorded.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit Sports 1-LD4497 - IAN 285066 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Crivit Sports 1-LD4497 - IAN 285066

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info