482700

Crivit Sports 10-LD2590 Anleitung

1
Zoom out
Zoom in
Vorherige Seite
1/1
Nächste Seite
Basic settings
The setting mode for basic settings is activated by
inserting the battery or by pressing RESET (on
the back side of the unit).
The language selection will appear on the display.
Select a language (English, German or French)
by pressing B, Confirm your selection by pressing
A.
The display will now show the mode for advanced
users
ADVANCE / FORTGES / AVANCE
Or for beginners
EASY / EINFACH / FACILE
Select a mode by pressing B. Confirm your
selection by pressing A.
Important: In easy mode only the following
features are available:
Speed, average speed, trip distance and trip
timer.
In advanced mode all features are available and
settings for 2 bicycles can be stored.
C1 will now appear on the display. Set the
circumference of your tire in mm (see “Calculating
tire circumference”). Press B to set each digit and
press A to confirm each setting.
If you have selected advanced mode, you may
now enter the tire circumference for an additional
bicycle.
Calculating tire circumference
Tire circumference can be easily calculated by
multiplying the tire diamtere with 3.1416.
The tire curcumference of some standard tire
types is listed in the following table.
Diameter Circumference
20" 1598
22" 1759
24" 1916
26" (650A) 2073
26,5" (Tubular) 2117
26,6" (700x25C) 2124
26,8" (700x28C) 2136
27" (700x32C) 2155
28" (700B) 2237
ATB 24"x1,75 1888
ATB 26x1,4 1995
ATB 26x1,5 2030
ATB 26x1,75 2045
ATB 26x2 (650B) 2099
27"x1 2138
27"x1 1/4 2155
The display now shows the unit of distance
SET KM / EINST KM / AJUSTE KM
Select the unit miles (M) or Kilometers (KM) by
pressing B. Confirm your setting by pressing A.
The display now shows the age selection
SET AGE / ALTER / AGE
Set your age in years. Press B to set each digit
and pres A to confirm each setting.
The display now shows the unit of weight
selection
SET KG / EINST KG / AJUSTE KG
Select the unit Kilogram (KG) or Pounds (LB) by
pressing B. Confirm your selection by pressing A.
The display now shows the weight selection
SET WT / GEWICHT / POIDS
Set your weight in the selected unit. Press B to
set each digit and pres A to confirm each setting.
The display will now show the 12 or 24 hour time
format selection
SET CLK / EINST U / REG MONT
Select your preferred format by pressing B.
Confirm your selection by pressing A.
Set the hours and minutes in the same way.
The display will now show the service interval
selection
SERVICE / SERVICE / SERVICE
Set the interval by pressing B. Confirm your
selection by pressing A.
Possible settings are 200, 400, 600 or 800
Kilometers or Miles
If you selected advanced mode you may now
select the service interval for an additional bicycle.
The display will now show the temperature unit
selection. Select the temperature unit Celsius (°C)
or Fahrenheit (°F) by pressing B. Confirm your
selection by pressing A.
Using the bicycle computer
Press B to select a feature mode of the computer.
The lower row of the display will show the name
of the mode.
Press A to reach the subfeatures of each mode.
Press and hold A to reach the setting mode of a
feature or reset stored values.
Time
CLOCK / UHRZEIT / HEURE
Press and hold A for 3 seconds to enter time
setting mode (see basic settings)
Total distance
TOTODO / KM-RAD / KM-VELO
Press and hold A for 3 seconds to enter setting
mode for tire diameter (see basic settings).
After tire diameter setting the stored values for the
odometer can be changed.
Total distance for both bicycles
TOTALODO / GESAMTKM / DIST-TOT
Press and hold A for 3 seconds to enter tire
circumference setting (see basic settings).
After tire diameter setting the stored values for the
odometer can be changed.
Trip distance
TRIPDIST / TAGES-KM / DISJOUR
Press and hold A for 3 seconds to reset trip
distance, trip time and average speed.
Maximum speed
MAXSPEED / MAX-KMH / VIT-MAX
Press and hold A for 3 seconds to reset the stored
maximum speed.
Average speed
AVGSPEED / DURCH-KM / VITMOYEN
The average speed can be reset in the menu „trip
distance“.
Trip time
TRIPTIME / FAHRZEIT / TEMPPARC
The trip time can be reset in the menu „trip
distance“.
Thermometer
TEMP / GRAD / TEMP
Press A to show the maximum (HI) and minimum
(LO) values.
Press and hold A for 3 seconds to reach
temperature unit selection (°C or °F) (see basic
settings)
Stop watch
STPWATCH / STOPPUHR / CHRONO
Press A to start or stop the stop watch. Press and
hold A to reset the stop watch.
Current calorie consumption
CAL RATE / KAL RATE / CONS CAL
Calorie consumption at the current speed is
displayed.
Calorie counter
CAL RATE / KAL RATE / CONS CAL
Press and hold A for 3 seconds to reset the
calorie counter.
Fat burn in grams
FAT-BURN / FETT / GRAS
Press and hold A for 3 seconds to reset the fat
burn counter.
Distance counter (forward/reverse)
KM / KM / KM
Press and hold A for 3 seconds to reach the
setting mode for the distance counter.
The symbol for the forward counter (-) or reverse
counter (+) will appear. Press B to select a
counter and confirm your setting by pressing A.
You can now set the desired distance. Press B to
set each digit and press A to confirm each setting.
After the set distance has been covered the
display will blink. Press A to stop the blinking.
Trip timer (forward/reverse)
TIME / TIMER / TIMER
Press and hold A for 3 seconds to reach the
setting mode for the trip timer.
The symbol for the forward counter (-) or reverse
counter (+) will appear. Press B to select a
counter and confirm your setting by pressing A.
You can now set the desired riding time. Press B
to set each digit and press A to confirm each
setting.
After the set riding time has been completed the
display will blink. Press A to stop the blinking.
Scan mode SCAN
In scan mode SCAN will appear on the display.
The trip distance (DST), maximum speed (MXS),
average speed (AVS) and trip timer (TM) alternate
on the display.
Service reminder
When the set service interval is reached the
service reminder will blink on the display. Press A
to reset the service reminder.
Selection of bicycle 1 or bicycle 2
Press A and B together briefly to load the settings
for bicycle 1 or 2.
Please note: All stored values except total
distance will be reset.
Battery replacement (30-second memory)
Before changing the battery, please press and
hold A and B together. {{-----}} will appear
on the display. If a new battery is inserted within
30 seconds, the stored values will remain intact.
Press A.
Please dispose of your batteries properly in
containers especially set up at retailers. Batteries
do not belong in household waste.
Easy mode, advanced mode and custom
menus for easy mode
Press and hold C for 3 seconds.
The display will now show the mode for advanced
users
ADVANCE / FORTGES / AVANCE
or for beginners
EASY / EINFACH / FACILE
Select the desired mode by press B.
You can now confirm your selection by pressing A
or customize the easy mode. To customize easy
mode select the mode by pressing B, then press
and hold A.
Press B to activate (ON) or deacitvate (OFF) the
clock feature. Confirm your setting by pressing A.
The other features can be activated or
deactivated in the same way.
Energy saving mode
If the bicycle computer was not used for 5 minutes
it will automatically enter standby mode. Press
any button or start riding to reactivate the
computer.
Batteries
Please dispose of your batteries properly in
containers especially set up at retailers. Batteries
do not belong in household waste.
Disposal
This electrical appliance may not be disposed of
with normal household waste. Please hand it in at
an appropriate local collection point.
Warranty
We provide a 3-year warranty for this item. The
warranty period starts from the date of sale
(receipt, proof of purchase). Within this period we
rectify all faults which are attributable to material
and manufacturing defects at no cost. For
damage which is attributable to improper
treatment, e.g. dropping, knocking, or water
damage, there is no warranty claim.
Free sevice hotline: 00800 5515 6616
http://www.inter-quartz.de
digi-tech ®, Valterweg 27A, D-65817 Eppstein
Congratulations on your purchase of this bicycle
computer. Please read the instruction manual
before using the unit.
Safety notes
This electronic appliance must be
protected from water and other hazards.
It is not a toy and children should not
use it unsupervised.
Setup
The setup and installation of the bicycle computer
is described on the information sheet
„installation“.
After installing the bicycle computer, please
remove the protective foil from the display and
press any key to start the computer.
Light
Press C briefly to activate the light temporarily.
Cleaning instructions
Clean the product with a dry, lint-free cloth. A
glasses cleaning cloth is ideal.
Features
!
Memory for 2 bicycles
!
Service interval selectable
!
Speed display (0-99,9km/h)
!
Average speed (0-99,9km/h)
!
Maximum speed (0-99,9km/h)
!
Speed comparison
!
Speed tendency
(Accelerating or slowing down)
!
Trip timer (max 9:59:59)
!
Trip timer (forward or reverse counting)
!
Time
!
Stop watch
!
Distance counter (0-999,99km/m)
!
Distance counter (forward or reverse counting)
!
Distance counter for 2 bicycles
!
Total distance
!
Memory function for Odometer
!
Scan feature for alternating display
!
Thermometer with max./min. memory
!
Celsius or Fahrenheit selectable
!
Kilometers or miles selectable
!
Fat burn counter
!
Calorie counter
!
Standby feature
!
Auto start
!
Easy or advanced mode selectable
!
Backlight
Display description
1 Selected bicycle (1 or 2)
Speed tendency: acceleration (turning to the
right) or slowing down (turning to the left)
2 Service interval reached
3 Scan (alternating display)
4 Subfeature display
5 Main feature display
6 Battery low indicator
7 Speed comparison: faster or slower than
average speed
Scope of delivery
1 Info sheet „Installation“
2 Bicycle computer
3 Magnet
4 Wired sensor with mount
5 Battery 3V CR2032
6 Cable ties (6 pcs.)
A B
C
1
2
3
4
5
6
7
2
3
4
5
6
1
-1- -2-
-3-
-4-
-5- -6-
-7-
-8- -9-
-10-
-11-
-12-
-13-
-14-
-15-
10-LD2590
Edition 1
G/I

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

crivit-sports-10-ld2590

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Crivit Sports 10-LD2590 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Crivit Sports 10-LD2590

Crivit Sports 10-LD2590 Bedienungsanleitung - Deutsch - 1 seiten

Crivit Sports 10-LD2590 Bedienungsanleitung - Holländisch - 1 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info