Bedienungsanleitung Crivit Z31982C IAN 96427 (Seite 4 von 19) (Englisch, Dänisch)

736620

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

4 GB/IE/CY

Keep exits clear. Do not block the exit with

objects.

Make sure you know the ﬁre precaution

arrangements on the site.

Take note of the eﬀects of the weather

and climate

When selecting the location to put up your

tent, you should always consider the local

situation and how this might change. Will the

terrain turn into a lake if it rains? Please take

into account any rising rivers and incoming

tides.

Protect the product against strong wind and

storms. Place the product in a location that is

protected from the wind if possible.

If a strong wind is forecast, replace the

normal tent pegs with special storm pegs.

You can ﬁnd information about meaningful

supplementary products at specialist shops.

The tent should be taken down before heavy

snowfall or stormy weather.

Remove any snow directly from the product.

Otherwise the product may collapse under

the weight.

Ensure that the tent is not too taut when it

is erected, otherwise it may not be able to

adapt to changing weather conditions and

might be damaged.

Zips are wearing parts and do not fall under

the guarantee conditions.

The polyester material of the tent consists of

water-repellent material.

It is possible that during the ﬁrst rainfall

the tent will not be completely watertight.

However, the threads of the tent will contract

when exposed to water so that after a short

time the tent will become watertight.

When exposed to moisture and rain, tent

fabrics expand to varying degrees and

make it necessary to adapt the length of

the guy lines. If the material becomes taut

again while drying, the guy lines have to be

loosened again in good time.

Do not use any insect spray in or on the tent.

Small leaks on the seams can be repaired

with a seam spray and impregnation spray

can be used for the tent skin.

§Assembly

Please ensure that the product is only assembled/

disassembled by a competent person.

§Erecting the tent

ATTENTION: Please note that the poles are

under tension and snap into the natural shape of

the tent. Taking care that the release of tension

does not cause any injury.

Remove the rubber band and throw the

product away from you into the air.

§Folding the tent

Please see a video using our QR code that

demonstrates how to fold away and packing the

tent.

Grab all the loops together in one of your

hands. Start at the rear end in order to allow

the air escape completely through the front

entrance (see ﬁg. A–B).

Keep the four loops gathered in one hand

and put the tent into an upwards position

(see ﬁg. C).

Press the tip of the upper loop towards the

ground and move it towards the middle.

Keep pressing downwards the new loops

with one hand while the other hand keeps

holding the other four loops together

(see ﬁg. D–E).

Loose the grip of the hand that holds the

4 loops and fold all loops into each other

(see ﬁg. F–G).

Align the loops and secure the folded tent

with the elastic strap (see ﬁg. H–I). You can

now store the tent in its bag.

96427_14_Crivit_GB_IE_DK_SI_CY_02.indb 4 13/12/13 10:09 am

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit Z31982C IAN 96427 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Crivit Z31982C IAN 96427

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info