21
1. The Basic Unit
1.1. Assembling the Basic Unit
1st step: Put one of the rubber rings
on each side of the bolts of the
bumper bar (1), insert the bolts in the
holes at the front of the basic unit,
aligning the long hole of the
attachment tab for the reflector (2)
with the long hole on the basic unit
itself.
2nd step: Insert the attached fabric
loop more or less vertically over the
bumper bar bolts protruding inwardly
from the base frame, screw on the
self-locking nuts and tighten up until
secure.
3rd step: Screw tight the attachment
tabs on the bumper bar and basic
unit using the attached screw, washer
and self-locking nut inserted through
the long holes; tighten the nut until
secure.
To unfold the passenger compartment,
remove the upper frame from the lower.
Then put your hand into the Croozer
and pull the seat handle back.
Engage first the left and then the right
catch.
1.1.2. Assembling the Passenger Compartment
1.1.1. Assembling the Bumper
Drawbar, buggy wheel, jogger wheel
with wheel arms
Passenger compartment with multi-
purpose weather cover folded down
Models 535 and 737 come delivered with:
Wheels, handlebar, safety flag
This assembly step may only be carried out by a dealer assembling the trailer for the first time.