Bedienungsanleitung Croozer Kid Plus 2019 (Seite 13 von 52) (Englisch)

772389

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

CroozerKidPlus-Kid19-ENG-1-19

Initial Assembly and Unfolding the Croozer

Checking and adjusting the parking brakes

of the Croozer Kid Plus

To ensure that the parking brakes are in perfect working

order, they must be checked and, if necessary, adjusted.

When checking and adjusting the parking brakes, both

wheels must be removed.

The parking brakes must be correctly adjusted! If the

parking brakes have not been correctly adjusted, the

parked Croozer Kid Plus could roll away unexpectedly,

resulting in accidents with serious injuries or death.

1. If the wheels are mounted, remove them.

2. Pull back the brake lever (1) as far as it will go. The

pins (2 and 4) on both sides of the Croozer will be

pushed out of the brake bodies.

3. Use a ruler to measure how far the pins extend from

the brake bodies. The parking brake is correctly

adjusted if the respective pin extends by approx. 11 to

12 mm (7/16” to 15/32”).

If the pin extends less than 11 mm (7/16”), the brake

must be adjusted.

4. If the pin (4) on the left side of the Croozer extends from

the brake body by less than 11 mm (7/16”), then loosen

the locknut and turn the respective barrel adjuster (5) on

the brake lever anticlockwise until the pin is extended

11 to 12 mm (7/16” to 15/32”). Re-tighten the locknut to

secure the position of the barrel adjuster.

5. If the pin (2) on the right side of the Croozer extends

from the brake body by less than 11 mm (7/16”), then

loosen the locknut and turn the respective barrel ad-

juster (3) on the brake lever anticlockwise until the pin is

extended 11 to 12 mm (7/16” to 15/32”). Re-tighten the

locknut to secure the position of the barrel adjuster.

Tip: Using barrel adjusters with locknuts:

Loosening: Use an 8mm spanner to brace the bar-

rel adjuster (7) while rotating the locknut (8) several

turns anticlockwise using a 10mm spanner.

Adjusting: The barrel adjuster (7) can now be

turned to adjust the length of the cable.

Tighten: Brace the barrel adjuster (7) with an 8mm

spanner while using a 10mm spanner to turn the

locknut (8) as far as it will go clockwise.

6. After both pins have been checked and, if applicable,

adjusted, mount the wheels and check the function of

the parking brakes by pulling back the brake lever and

trying to move the Croozer forwards or backwards with

gentle pressure. It should not be possible to move the

Croozer when the parking brakes are engaged.

0–11 mm (0”–7/16”)

321

4321

11–12 mm (7/16”–15/32”)

0–11 mm (0”–7/16”)

123

11–12 mm (7/16”–15/32”)

123

0–11mm

(0”–7/16”)

11–12 mm

(7/16”–15/32”)

1234

11–12 mm

(7/16”–15/32”)

Croozer Kid Plus

turn

brace

turn

brace

Loosen locknut Tighten locknut

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Croozer Kid Plus 2019 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Croozer Kid Plus 2019

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info