Bedienungsanleitung Crosley CR612 Corsair (Seite 6 von 7) (Englisch)

618016

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

The clock time can be set with the power turned on

or off as long as the unit is plugged in. To set the

clock, follow the instructions below.

1 Press the TIME (14) button. The clock display

will begin to flash.

2 Press the FORWARD SKIP

(16) button to

set the hour.

Note: There is a PM indicator light that will come

on to denote PM hours.

3 Press the BACKWARD SKIP

(17) button to

set the minutes.

4 Once the correct time is set, press the TIME (14)

button again to store the time.

5 To switch between 12H and 24H mode, press

and hold the TIME (14) button.

This unit features dual alarms. You can set each

alarm to wake you at different times. The alarms can

be set with the power turned on or off as long as the

unit is plugged in. To set the alarm(s), follow the

instructions below.

To set Alarm 1

1 Press Alarm 1. The clock display will switch to

alarm time and start to flash. The Alarm 1 LED

will come on.

2 Press the FORWARD SKIP

(16) button to

set the hour.

Note : There is a PM indicator light that will come

on to denote PM hours.

3 Press the BACKWARD SKIP

(17) button to

set the minutes.

4 Once you have the correct alarm time set for

Alarm 1, press the Alarm 1 button again to turn

the alarm on. The Alarm 1 LED with stay lit.

5 To turn the alarm off, press the Alarm 1 button

again. The alarm will turn off and the LED light

will go off.

6 Once set, the alarm will sound once the clock

reaches the set alarm time for Alarm 1. The Alarm

1 LED will begin to Flash.

7 To turn the alarm off while it is going off, press

the Alarm 1 button.

To set Alarm 2

1 Press Alarm 2. The clock display will switch to

alarm time and start to flash. The Alarm 2 LED

will come on.

2 Press the FORWARD SKIP

(16) button to

set the hour.

Note : There is a PM indicator light that will come

on to denote PM hours.

3 Press the BACKWARD SKIP

(17) button to

set the minutes.

4 Once you have the correct alarm time set for

Alarm 2, press the Alarm 2 button again to turn

the alarm on. The Alarm 2 LED with stay lit.

5 To turn the alarm off, press the Alarm 2 button

again. The alarm will turn off and the LED light

will go off.

6 Once set, the alarm will sound once the clock

reaches the set alarm time for Alarm 2. The

Alarm 2 LED will begin to flash.

7 To turn the alarm off while it is going off, press

the Alarm 2 button.

Note : The alarm will wake you to Radio, CD or

Buzzer. Turn the FUNCTION SWITCH to your

desired wake up mode. You can set this mode

with the radio on or off. In the case of power

outage, the alarm will wake you to Buzzer if the

battery is installed. The alarm will sound for 60

minutes if not stopped manually by pressing

Snooze or by turning the alarm off.

Clock & Alarm Operation

Control Locators

Unit Controls

22 Snooze

23 CD Door Open

24 FM Wire Antenna

25 Battery Cover

26 AC Power Cord

8 5

Setting The Clock

Setting The Alarm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crosley CR612 Corsair Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info