T
There is no power
1 Make sure radio is plugged in correctly
2 Look at the ST
to see if it is red.
3 If the red light is on, press the POWER button
/ to turn the unit on.
There is no sound
1 Make sure the mute function is turned off.
2 Check that the volume is turned up by pressing
VOLUME UP button / on the remote.
Note: V
level 15 and ends at level 40.
3 Make sure INT
is switched to INT
external speakers, in which case it should be
on EXT
4 Check to make sure power is turned on.
CD does not play
1 Check to make sure CD is inserted correctly
(label side facing up).
2 Check to see that surface of CD is clean.
3 Make sure function switch is set to CD mode.
USB - There is no music playing when
PLA
1 Make sure the MP3 device/Flash Drive has
stored music files.
2 The unit will only play Flash Drives up to
512 4096 Bytes
3 Reset USB by switching the unit Off or switching
to another Mode.
4 Check if the file(s) is WMA
does not play WMA
Remote not working
1 Replace battery
2 Be sure to point the remote towards remote
sensor when operating.
3. Remove obstacles in the path of the remote
and radio so the remote signal has a straight
path to the radio.
T
1 Check it the
2 Press the POWER button /
(on front of unit
or on RC) to turn the unit on, the ST
INDICA
3 Check that the unit is in PHONO Mode. T
moving the T
is heard.
No Sound is coming from the unit
1 The white protective needle cover has not
been removed
2 The V
The T
1. The black tie-wrap has not been removed from
underneath T
2. T
T
technology licensed from Fraunhofer IIS and
Thomson
There is no power
1 Make sure radio is plugged in correctly
2 Look at the ST
to see if it is red.
3 If the red light is on, press the POWER button
/ to turn the unit on.
There is no sound
1 Make sure the mute function is turned off.
2 Check that the volume is turned up by pressing
VOLUME UP button / on the remote.
Note: V
level 15 and ends at level 40.
3 Make sure INT
is switched to INT
external speakers, in which case it should be
on EXT
4 Check to make sure power is turned on.
CD does not play
1 Check to make sure CD is inserted correctly
(label side facing up).
2 Check to see that surface of CD is clean.
3 Make sure function switch is set to CD mode.
USB - There is no music playing when
PLA
1 Make sure the MP3 device/Flash Drive has
stored music files.
2 The unit will only play Flash Drives up to
512 4096 Bytes
3 Reset USB by switching the unit Off or switching
to another Mode.
4 Check if the file(s) is WMA
does not play WMA
Remote not working
1 Replace battery
2 Be sure to point the remote towards remote
sensor when operating.
3. Remove obstacles in the path of the remote
and radio so the remote signal has a straight
path to the radio.
T
1 Check it the
2 Press the POWER button /
(on front of unit
or on RC) to turn the unit on, the ST
INDICA
3 Check that the unit is in PHONO Mode. T
moving the T
is heard.
No Sound is coming from the unit
1 The white protective needle cover has not
been removed
2 The V
The T
1. The black tie-wrap has not been removed from
underneath T
2. T
T
technology licensed from Fraunhofer IIS and
Thomson
There is no power
1 Make sure radio is plugged in correctly
2 Look at the ST
to see if it is red.
3 If the red light is on, press the POWER button
/ to turn the unit on.
There is no sound
1 Make sure the mute function is turned off.
2 Check that the volume is turned up by pressing
VOLUME UP button / on the remote.
Note: V
level 15 and ends at level 40.
3 Make sure INT
is switched to INT
external speakers, in which case it should be
on EXT
4 Check to make sure power is turned on.
CD does not play
1 Check to make sure CD is inserted correctly
(label side facing up).
2 Check to see that surface of CD is clean.
3 Make sure function switch is set to CD mode.
USB - There is no music playing when
PLA
1 Make sure the MP3 device/Flash Drive has
stored music files.
2 The unit will only play Flash Drives up to
512 4096 Bytes
3 Reset USB by switching the unit Off or switching
to another Mode.
4 Check if the file(s) is WMA
does not play WMA
Remote not working
1 Replace battery
2 Be sure to point the remote towards remote
sensor when operating.
3. Remove obstacles in the path of the remote
and radio so the remote signal has a straight
path to the radio.
T
1 Check it the
2 Press the POWER button /
(on front of unit
or on RC) to turn the unit on, the ST
INDICA
3 Check that the unit is in PHONO Mode. T
moving the T
is heard.
No Sound is coming from the unit
1 The white protective needle cover has not
been removed
2 The V
The T
1. The black tie-wrap has not been removed from
underneath T
2. T
T
technology licensed from Fraunhofer IIS and
Thomson
USB Specification
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
P
SERVICING T
SERVICE PERSONNEL.
W
TO PREVENT
RAIN OR MOISTURE. DO NOT REMOVE COVER. PILOT
PLACE. NO USER SERVICEABLE P
SERVICE PERSONNEL.
* DESIGN AND SPECIFICA
Interface
- USB 2.0 Full speed, HOST (USB HUB is not supported)
Corresponding Flash memory
- Compatible with MPEG
- Compatible with Layer 1, 2, 3
- Compatible with Bit rate: 128 320 Kbps
- Subfolder nest : 8 levels
- Number of track / titles max 999
- Support ID3 tag V2.0
Specification
Frequency Range : AM 520 - 1710 KHz
: FM 87.5 - 108 MHz
USB Port 2.0 : Full S512MB - 4GB ( Support F
Power Consumption : 23W
Antennas : External FM antenna wire
: Built-in ferrite
Power Source :
AC
S : 4 Dynamic type x 2
S : 4 Ohm
S : 5W
Power Output : 2W x 2
Replacement needle : NP1
12
General
