!
2. Getting Started
2.1. Batteries
The battery is included in the package. It is not fully charged out of factory but it may still be able to
power on your phone. Please completely use up the power of the battery and then charge it for at
least 12 hours with your phone turned off. You battery will reach its optimal state after three cycles
of charge and discharge.
2.1.1. Installing and uninstalling the battery
To install the battery, remove the back cover from the phone by pressing firmly on the cover and
slide it down. Align the golden contacts of the battery to the contacts in the phone, and then gently
snap down the battery into place. Re-assemble the back cover.
To uninstall the battery, flip the battery out from the bottom of the battery.
2.1.2. Charging the battery
Plug the charger into the socket on the side of your phone. Connect the charger to an AC wall
socket. The blinking of the battery level icon indicates the battery is being charged. When the
blinking stops, it indicates the charging is finished
During charging, the phone and charger will feel warm to the touch. This is normal.
Warning:
− The operating ambient temperature of the charger is 0°C-50°C. Do not use it when the
temperature exceeds this limit.
− Use only chargers approved by the phone manufacturer to ensure safety. Failing to comply with
this will violate the terms and conditions of the warranty.
2.1.3. Using the battery
The waiting time and calling time capacities specified by the phone manufacturer are obtained under
the ideal operating environment. The actual values will vary with the network condition, operating
environment and operation method.
Please comply with the local regulations of disposing the battery (such as recycling). Do not dispose
it as household waste.
2.1.4. Battery level indicator
When the phone is on, the battery level indicator is located at the upper right corner of the screen.
2.2. Connecting to the Network
