Bedienungsanleitung Crown XTi 6002 (Seite 10 von 52) (Englisch)

581450

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

XTi2 Series Power Ampliﬁers

Operation Manual

page 10

Front Panel Navigation

From the front panel, you can change settings for several of the ampliﬁer’s integrated signal processing features: Input Y,

Crossover Frequency, EQ, Delay, Limiting, and Stereo/Bridge-Mono. The Icons in the display illuminate to show which

features are currently applied and turned on.

When you power-on the ampliﬁer for the ﬁrst time, the LCD screen displays “DSP OFF” (no DSP is applied). Subsequent

power-ons display the preset that was active when you last shut off the ampliﬁer.

The ﬁgure below shows the Menu Tree, which is the navigation path of options in the Menu. It shows how you navigate

through the front panel and which settings are available from the front panel. For full access to all features, it is required that

you hook up the ampliﬁer via USB to a computer and run either HiQnet System Architect™ or Band Manager™ software.

Both are available free via download from the following address: http://hiqnet.harmanpro.com.

Menu Tree

Navigating the LCD Screen Menu: Basics

To step through the Menu options, press the Sel, Next or Prev buttons as described in the menu tree above. Icons

illuminated at the top of the screen show which DSP functions are active with the current preset.

When you are modifying a preset, its icon ﬂashes. You can scroll through its settings with the Prev and Next buttons.

When you see the desired setting, select it by pressing Sel. Doing nothing returns you to the current preset after ten seconds.

In the LCD screen, if the Preset Icon is lit, the current preset is unchanged from its stored settings. If the Custom Icon is lit,

the current preset has been changed from its stored settings.

CURRENT PRESET

FLASHING “PRESET” TEXT

FLASHING “PRESET” ICON

Sel

BRIDGE

XOVER

BRG SUBS

SUB SYNTH

USER PRESETS

6-50

DSP OFF

Next or Prev

FLASHING “CONFIG” TEXT

XOV

EQ Ch. 1

EQ Ch. 2

DELAY Ch. 1

DELAY Ch. 2

LIM Ch. 1

LIM Ch. 2

STEREO/BRIDGE MONO

BRIDGE

STEREO

Sel

CH1+CH2

INPUT Y

STEREO

OFF, 90 Hz, 100 Hz, 1200 Hz,

1500 Hz, 2000 Hz, 2-CH SUB,

CUSTOM

Sel

MENU TREE

Press Next to see

each processor’s

options, then press

Sel to select an option.

PRESETS

(TEXT on screen)

DSP PROCESSES

(ICONS on screen)

Doing nothing returns you to the

CURRENT PRESET after a timeout delay.

Sel > Sel > Next goes to presets.

Sel > Next > Sel lets you

configure the DSP processes.

Starting from the CURRENT PRESET,

Power-up

Sel

EQ IN

EQ OUT

EQ IN

CURRENT, OFF, 50, 40, 30,

20,10, 9, 8, 7, 6, 5, 4, 3, 2, 1

CURRENT, OFF, 50, 40, 30,

20,10, 9, 8, 7, 6, 5, 4, 3, 2, 1

CURRENT, OFF, –0.5 dB,

–1.0 dB, –1.5 dB... –40 dB

CURRENT, OFF, –0.5 dB,

–1.0 dB, –1.5 dB... –40 dB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crown XTi 6002 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info