Bedienungsanleitung Cube Road bike (Seite 27 von 37) (Englisch)

657564

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

| 49 48 |

MTB/ ROAD BIKE/ TREKKINGMTB/ ROAD BIKE/ TREKKING

1. Have this tting work done by your

dealer.

2. To position your foot correctly on the

pedal:

a) Bring the pedal down to its lowest

position.

b) With the toe of your shoe pointing

downwards, position the hook nose of the

shoe in the front pedal insertion point.

c) When the hook nose is positioned

correctly in the pedal, push the whole

surface of the foot sharply downwards

until the clamping mechanism clearly and

audibly engages.

•

The shoe is now rmly vertically connected

with the pedal.

•

Depending on the pedal system, the shoe

has sideward freedom of movement.

3. To loosen your shoe from the pedal:

•

Twist your heel sharply away from the bike.

With click-in pedals, the shoe and pedal

are rmly connected in a vertical direc-

tion. When pedalling, you can not only

push the pedal down but also pull it

upwards.

To be able to use a click-in pedal to the

full, you need shoes specially designed

for the pedal system concerned and to

which the pedal hooks supplied with the

pedal can be axed.

The following description is intended

purely as an example.

Please refer to the instructions for your

pedal/shoe combination provided by the

manufacturer and/or consult your speci-

alist dealer in order to ensure that your

click-in pedal system is correctly assem-

bled and you use it correctly.

•

Open the lever again and turn the nut

counter-clockwise again as necessary.

•

Check that the wheels are seated rmly as

described in Chapter 7.1

8.9 Using click-in pedals (optional)

Risk of Personal Injury and Material

Damage!

Click-in pedals are not safety pedals.

If an excessive release force is set, it is

possible that you will not be able to get

your shoes out of the pedal quick enough

in an emergency situation.

If too soft a release force is set, the shoe

may possibly become disengaged from

the pedal unintentionally when you are

riding.

In either case, there is an increased dan-

ger of falling and injury.

•

Familiarise yourself with the click-in pedals

and how to use them.

•

Practise mounting onto and dismounting

from the pedals when not moving.

Sit on the saddle and hold onto a stable

object with one hand.

Click both shoes alternately in and out.

Please consult your dealer.

•

Familiarise yourself with the release on

careful practice rides.

•

Discover for yourself the optimum tightness

setting.

•

Practise mounting and dismounting at

various release settings.

•

You can nd details on how to adjust the

release setting in the accompanying parts

instructions and/or consult your dealer.

In unpredictable trac situations and on

dicult terrain, it is often necessary to

"click out" with one or even both shoes.

•

Practise this with both feet alternately.

•

When pedalling, place your shoe centrally

on the pedal so that you don‘t click in.

If need be, you can then support yourself

with one or both legs on the ground.

Road Bike MTB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cube Road bike Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cube Road bike

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info