Bedienungsanleitung Cube Road bike (Seite 57 von 75) (Deutsch)

657564

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

| 33 32 |

MTB/ ROAD BIKE/ TREKKINGMTB/ ROAD BIKE/ TREKKING

1. Checking the function of your brake

system:

•

In a static position operate both brake levers

until the brakes make rm contact.

•

Please note that in this position the mini-

mum distance between the brake lever and

the handlebar grip must be at least 35 mm.

•

Try to push the bike with the brakes applied

in this way.

Both wheels must remain locked.

7.8.1 Check rim brakes with cable (racing

bike version).

1. Check the brake cables and their clips:

•

The brake cables must not be damaged or

corroded.

•

On cable brakes, the brake cables must be

securely clipped along their entire length.

Racing bike rimbrake

2. Check that the entire brake system has

been secured and screwed in correctly:

•

Try to pull the brakes from the forks (front)

and from the frame (rear) by hand.

•

It must not be possible to pull the brakes o

and there must be no play in the xing bolts.

3. Check the position of the brake shoes.

•

With the brake applied, the brake shoes

must be in contact with the rim shoulder

along their entire length.

•

Under no circumstances must the brake

shoes touch the tyre even when the brake is

not applied.

35mm

•

There should be no play in the forks

bearing: no clicking should be heard or

felt. You should not hear creaking noises

either.

•

Lift the whole bike up so that the rear

wheel is higher than the front wheel.

•

Move the front wheel by steering to the

side and let it go again.

•

The front wheel must automatically

return to its original position.

•

The front wheel must not lock in any

position.

7.6 Check suspension forks

1. Check your suspension forks:

•

Pull the front brake lever and keep the

brake applied.

•

Press down on the handlebars with your

body weight so that the suspension forks

deect.

•

The forks must spring easily up and

down.

•

There must be no audible creaking or

rattling sounds.

•

Stick the front wheel between your legs

and try to pull the bicycle up using the

handlebars.

•

The standpipes mustn´t break loose from

the diving pipes or from the fork bridge.

•

Please regard the instructions for your

fork in the separate instruction manual.

7.7 Check the rear wheel suspension

1. Check your rear wheel suspension:

•

Sit on your bike and activate the sus-

pension in a standing position using

vigorous up and down movements.

•

The rear of the bike must spring up and

down easily.

•

There must be no audible creaking or

rattling sounds.

7.8 Check the brakes

Risk of Personal Injury and Material

Damage!

If the brakes malfunction, there is the risk

of loss of life.

•

Check your brake system particularly

carefully.

When touring for several days, the brake

disk, brake blocks and brake pads can

sustain a great deal of wear.

When touring like this, carry spare brake

blocks and replacement pads with you.

Only replace them yourself if you are

familiar with this task. Please consult

your dealer.

If you cannot replace them yourself, have

this done by a trained specialist.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cube Road bike Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cube Road bike

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info