Bedienungsanleitung Cubify CubeX (Seite 29 von 37) (Englisch)

534695

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

CAUSTIC SODA METHOD

Caustic soda can burn if handled improperly. Never handle caustic soda without using all of the supplied

Personal Protective Equipment (PPE): gloves, goggles and tongs. If caustic soda touches the skin, wash it

away immediately. If caustic soda touches the eyes, immediately use an eyewash treatment.

Never operate the unit without water in the cleaning tank. Damage may occur.

Never use boiling water. Damage may occur.

1. Position the unit on a at and stable work surface. Do not knock or move the tank during operation. This risks splashing

water onto electrical components.

2. Fill the tank with 0.75 liters of cold water. The caustic soda will create an exothermic reaction when added, which will

elevate the temperature of the solution.

Caustic soda is a harmful substance and can cause permanent damage if it touches the skin or eyes.

Use of personal protective equipment is essential. Never handle caustic soda without using the

supplied gloves and eye protection. Ensure that the area is cleaned down immediately after use, and

lock the caustic soda away to prevent misuse.

Do not engage the ultrasonic feature while stirring in the caustic soda. This will encourage the

solution to vaporize.

Ensure the area is well ventilated, and do not directly inhale the vapor from the tank.

3. Using scales and a measuring bowl, measure out 200 grams of caustic soda.

4. Pour the caustic soda into the tank in approximately 40-gram increments, stirring thoroughly after each addition. Stirring

is essential to make sure the caustic soda granules do not collect at the bottom of the tank.

5. Immediately clean measuring bowl and scales to ensure removal of all caustic soda.

6. Using the plastic tongs and all the personal protection equipment provided, gently lower the model into the caustic soda

solution being very careful not to spill any of the solution.

7. Close the lid, connect the power supply and press the power button to turn on the tank.

8. Use the -5 and +5 buttons to set the temperature. For best results, set the temperature to 60°C.

Do not set the temperature above 60°C as the reaction between the caustic soda and the water is

exothermic, and will continue to elevate the temperature. Actual temperature should never exceed

80°C.

9. Once the tank has reached 60°C, use the -5 and +5 buttons to set the timer for 180 minutes. The ultrasonic process will

begin as soon as you have set the time.

10. After 180 minutes, remove your model from the tank using the plastic tongs and wearing the personal protection

equipment provided. Immediately run under cold water for 1-2 minutes.

Continue wearing your personal protection equipment when handling the model until the manual tells

you it is safe to do otherwise.

11. All support material should have dissolved. Any remaining supports can be crumbled or scraped away with a knife, or

rinsed off in the sink.

12. Empty the caustic solution from your Ultrasonic Support Removal Tank. It is safe to pour it in the sink as caustic soda

can be used as a drain cleaner.

13. Rinse the tank and rell it with 0.75 liters of water.

14. Using the plastic tongs, place the model back in the tank.

15. Once you have cleaned all caustic soda from the area, you may remove your personal protection equipment.

16. Repeat the ultrasonic process with the clean water for 30 minutes at 60°C to remove any caustic soda residue that may

remain on the model.

17. Once you have completed the ultrasonic process for the second time, use the provided tongs to remove the model from

the ultrasonic tank and rinse it under cold water for 1-2 minutes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cubify CubeX Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info