723560
18
Zoom out
Zoom in
Vorherige Seite
1/31
Nächste Seite
Other Setting Methods
28
This is how to set the initialize the time for filter change alarm after the filter is replaced. When the
"Change Filter" light is turned ON, replace the filters, and initialize the time for filter
change alarm.
How To Initialize time for filter change alarm
After putting the Power Plug in, press the Mode button for three seconds or longer
in the waiting mode (when all the lights of the Display Panel are turned OFF).
(While the product is working, stop it by pressing the "ON/OFF" button.)
1
You can set your preferred voice among English, Chinese and Korean voices.
The default voice setting is English.
The Display Panel will display "En" as in the picture.
2
Please select the language(English, Chinese, Korean)by pressing "Fan Speed" button.
3
Save the function setting by pressing the "ON/OFF" button.
When you press the TIME button or remove the Power Plug, the function setting will be canceled.
When no button is pressed for seven seconds or longer, the function setting will be canceled.
4
How to Set Language
<In case of setting English voice> <In case of setting Korean voice>
<In case of setting chinese voice>
After putting the Power Plug in, press the Mode button for three seconds or
longer in the waiting mode (when all the lights of the Display Panel are turned
OFF), enter the Language Setting, and press the Mode button again.
After putting the Power Plug in, press the STERILIZATION button for three seconds in the waiting
mode (when all the lights of the Display Panel areturned OFF) and the alarm will be initialized.
(While the product is working, stop it by pressing the "ON/OFF" button.)
1
This is how to cancel the Voice function or control the voice volume.
The Display Panel will display "3" and "Voice" as in the picture.
2
Set the volume as you want by pressing the "Fan Speed" button.
If you set the volume to be "0F," the Voice function will be canceled.
3
Save the function setting by pressing the "ON/OFF" button.
When you press the TIME button or remove the Power Plug, the function setting will be canceled.
When no button is pressed for seven seconds or longer, the function setting will be canceled.
4
How to Set Voice Volume
<In case Voice function is canceled>
Press the STERILIZATION button for three seconds.
<Maximum Voice Volume><Default Voice Volume>
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cuckoo AC-12ZH10F wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info