12
When the product have any problems or use it inappropriately you can see the below marks.
When the inner pot is not placed into the unit.
When pressing the “Pressure Cook/Turbo” and “Timer” botton, while the Lock/Unlock handle
is on “Unlock”.Turn the Lock/Unlock handle “Lock”.
When setting preset time longer than 13 hours
Set the preset time within 13 hours(Refer to page 20.)
Temperature sensor problem.
(Consult the service center and dealer.)
3
Wipe the water and put it in.
4
Close the top cover and turn the Lock/Unlock handle to
“Lock”.
Wipe the water on the inner pot with a dry cloth and
put it in the main unit. Then connect the power plug.
Top cover will not close if the inner pot is not placed correctly in the main body
(Place the inner pot to the corresponding parts of the main body)
If there is any alien substance on the temperature sensor or the bottom surface
of the inner pot(oven), wipe it off before putting the pot into the main unit.
Wipe the top cover heating part well before cooking the rice.
If the top cover heating part is not cleaned well it can cause smells and discoloration.
If there is any rice or alien substance on the oven packing or inside the upper part of the inner pot,
the steam will leak. This will make the rice under-cooked and crumble.
If you press the cook button without setting the Lock/Unlock
handle to “Lock” the cooker will not operate. You will hear “beep
beep beep” sound and is shown in the LCD.
If it is hard to close the top cover due to internal pressure, tilt the
pressure weight. This will make it easy to close.
After setting the Lock/Unlock handle to “Lock”,
check the pressure weight is horizontal and the
pressure Lamp is on.
pressure
Temperature
Sensor
