Bedienungsanleitung Cuisinart BFP 703 CE (Seite 5 von 33) (Englisch)

72231

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

(d)

(c)

(b)

(a)

BLENDER ASSEMBLY,

USE AND CARE

To use your Cuisinart

SmartPower Duet

Blender/Food Processor,

begin by assembling the blender jar.

1. Turn the blender jar (a) upside down, and place it flat on a sturdy

surface.

2. Position the rubber gasket (b) on the round opening on the bottom

of the blender jar.

3. Turn the cutting assembly (c) upside down, and place the blade end

in the blender jar opening. Note: Blades are very sharp, handle

carefully.

4. Secure the rubber gasket and cutting assembly in position by

placing the smaller opening of the locking ring (d) on top of the

cutting assembly. Engage threads by twisting the locking ring

clockwise until tightened. Make sure locking ring is tightly fastened

to blender jar. Once assembled, turn the blender jar right side up.

5. Push the cover onto the top of the blender jar. Insert the measured

pour lid into the cover, aligning the tabs in the pour lid with the slots

in the cover. Twist clockwise to lock pour lid into the cover.

6. Place the blender jar on the motor base so that the jar markings are

facing you and the handle is positioned to one side.

7. Plug in power cord. Your blender is now ready to be used.

Helpful Reminders

• Once the cover is in position, additional ingredients can be added

during blending by simply twisting the measured pour lid

counterclockwise until the tabs in the pour lid align with the slots in

the cover. Pull up the pour lid, add ingredients, and replace the pour

lid.

• Cover should always be in place while the unit is ON.

• Warning: Do not place blender jar on base while motor is running.

• Do not twist locking ring from blender jar when removing blender jar

from base. Simply lift blender jar from motor base.

• Boiling liquid or solid frozen foods (with the exception of ice cubes

or ½" pieces of frozen fruit) should never be placed in the blender

jar.

• Do not place ice, frozen foods or very cold liquids in a blender jar

that has come directly from a hot dishwasher.

• Do not place very hot liquids or foods in a blender jar that has come

directly from the freezer. Boiling liquids should cool for 5 minutes

before being placed in blender jar.

• Follow Cleaning and Maintenance instructions on page 7 prior to

your first use.

BLENDER OPERATION

1. Place the motor base of your Cuisinart

SmartPower Duet

Blender/

Food Processor on a flat, sturdy surface. It is important that the

surface be clean and dry. Assemble the blender by following the

Assembly instructions. Once the jar is assembled and is in position

on the motor base, plug the Cuisinart

SmartPower Duet

Blender/

Food Processor into an electrical outlet.

2. Add all necessary ingredients to the blender jar and replace the

cover. You may add additional ingredients by lifting the measured

pour lid and dropping ingredients through the fill area. Replace the

measured pour lid after adding ingredients. Do not place hands into

blender jar with blender plugged in.

Note: Add liquid ingredients first, then follow with solid ingredients. This

will provide more consistent blending and prevent unnecessary stress

on the motor.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cuisinart BFP 703 CE Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info